03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA.pdf - 第182页
13 ADJUSTABLE WIDTH STENCIL MOUNT 13.2 ELECTRICAL SCHEMATIC 182 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 13.2 ELECTRICAL SCHEMATIC Semi-Auto Stencil Load Option
13 ADJUSTABLE WIDTH STENCIL MOUNT
13.1 OVERVIEW
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 181
When Load Screen is selected on the MMI, the S-ASL is driven forward by the print carriage to the
correct load position. The operator opens the printhead cover and loads a stencil into the printer
until it abuts the S-ASL lever. This is the correct load position for the stencil.
13 ADJUSTABLE WIDTH STENCIL MOUNT
13.2 ELECTRICAL SCHEMATIC
182 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
13.2 ELECTRICAL SCHEMATIC
Semi-Auto Stencil Load Option
13 ADJUSTABLE WIDTH STENCIL MOUNT
13.3 CALIBRATIONS
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 183
13.3 CALIBRATIONS
13.3.1 Chase to Table Level
Chase to Table Level setting is factory set and no attempt should be made to make adjustment. If
the chase rails have been removed from the printer, a coplanarity procedure must be carried out
before commencing printing. Please contact your local customer support office for more detail.