03217917-01-01E By DEK Technical Reference Manual Vol 1_enPDFA.pdf - 第227页
16 TRANSPORT RAILS MODULE 16.1 OVERVIEW TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 227 16 TRANSPORT RAILS MODULE 16.1 OVERVIEW 1 2 3 4 5 6 7 8 9 10 1 Rear Transport Belt Drive Motor 6 Left Hand Clatter Bar 2 Trans…
15 BOARD STOP
15.7 CALIBRATION
226 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
Close Up
► Remove the board.
► Select Back.
► Select Back.
16 TRANSPORT RAILS MODULE
16.1 OVERVIEW
TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019 227
16
TRANSPORT RAILS MODULE
16.1 OVERVIEW
1
2
3
4
5
6
7
8
9
10
1 Rear Transport Belt Drive Motor 6 Left Hand Clatter Bar
2 Transport Belt (2 positions) 7 Fixed Front Rail
3 Front Transport Belt Drive Motor 8 Moving Rear Rail
4 Right Hand Clatter Bar 9 Moving Rear Rail Linear Guide
(2 positions)
5 Manual Rail Adjuster 10 Rail Width Drive Motor
16 TRANSPORT RAILS MODULE
16.1 OVERVIEW
228 TECHNICAL REFERENCE MANUAL Vol 1 E By DEK 04/2019
1
2
3
4
5
6
7
8
1 Board at Left Sensor 5 Moving Rail Home Vane
2 Left Rail Lift Sensor 6 Right Rail Lift Sensor
3 Rail Width Leadscrew 7 Board at Right Sensor
4 Moving Rail Home Sensor 8 Board Clamps
The system has a programmable width conveyor system, set by the board width parameter, in the
product file. The rails transport the board, using belts, from the upline machine into the printer,
where the board is positioned, clamped, and printed. After printing, the board is transferred, using
the same belts, to the downline machine.
An option is available for heavy boards, the transport rails can transport boards weighing up to 6kg.
This is achieved using an extra drive pulley on each rail and flat profiled transport belts.