CP40 service manual.pdf - 第128页

4. Feeder Base & ANC (CP-40) NO Symptom Possible Cause Error Code Action Instr uctio n 1 ANC Malfunction ANC Connector Pin Chec k Modify AN C C onnector Pin. 4-3-2 2 Modify Feeder I/F CN No.3 and C N No.4 Connector P…

4. Feeder Base & ANC

(CP-40)

4-1. Trouble Diagnosis Guide Table

Malfunction

ANC Cylinder

ANC Connector Pin Check 1

Feeder I/F Board Connector Check 5

ANC Coordinates Modification 4

Head Compliance O-Ring Check 3

ANC Shutter Parallelism Check 6

ANC Shutter Foreign Material

Removal

Multi Cylinder Connector Check 1

Multi Cylinder Replacement 5

Speed Con Adjustment 2

Feeder I/F Board Replacement 4

Multi Cylinder Air Check 3

Parts

Symptom

Check and Action

# Number Indicates Priority of Check Items

4. Feeder Base & ANC

(CP-40)

NO Symptom Possible Cause Error Code Action

Instructio

ANC Malfunction

ANC Connector Pin Check

Modify ANC Connector Pin.

4-3-2

Modify Feeder I/F CN No.3 and CN No.4

Connector Pins.

4-3-2

3 Bad AC Power of Front ANC Panel AC Modify Connector Pin. 4-3-2

4 ANC Shutter Check

Remove Foreign Materials from ANC Shutter.

Bad Recognition of Nozzle

Modify Coordinates of ANC. 4-3-4

6 Replace O-Ring.

ANC Shutter Malfunction

Reassemble ANC.

8 Clean with ANC Shutter WD40.

Cylinder

Malfunction

Multi Cylinders Operates with them

Exchanged.

Modify Wiring. 4-3-2

Multi Cylinder does not Operate.

Check Connector Pin for Bad Contact. 4-3-2

11 Replace Multi Cylinder. 4-3-5

12 Replace Feeder I/F Board. 4-3-1

Slow Cylinder Speed

Adjust Speed Con. 4-3-5

14 Check Multi Cylinder Air. 4-3-5

4-2. Trouble Diagnosis

4. Feeder Base & ANC

(CP-40)

4-3-1. Feeder I/F Board Replacement

Version Date WA QA CA Note

00 Nov04 O O O

1) Using Teaching Box, Move Head to the

Rear.

2) Turn Conveyor Width Adjusting Handle to

the Right-hand to Widen Conveyor Width as

Widely as Possible.

Decrease

Increase

J1301706

3) Loosen Seven M3*6 Toras Bolts to Open

Chip Cover on the Inner Left-side of

Equipment.

J2102037