CP40 service manual.pdf - 第173页
6. Computer (CP-40) Spherical Bolt(for Securing Front Cover) 4ea 1. Using Cross-head Screwdriver, Loosen Four Spherical Bolts to Open Front Cover. 2. Determine the Area to be Repaired and Checked. P/S only for PC CD ROM …
6. Computer
(CP-40)
Version Date WA QA CA Note
00 Nov04 O O O
6. Loosen Two Bolts(for Securing FDD) to Disconnect FDD.
Note) For Assembly, Perform Reverse Procedures of Disassembly. Connect Connector with Red Wire of Signal
Cable toward the Inside.
Spherical Bolt(for
Securing FDD) 2ea
Note) Red Wire of Signal Cable
should be toward the Inside.
POWER
CABLE
+5V
+12V
12VG 5VG
6. Computer
(CP-40)
Spherical Bolt(for
Securing Front Cover)
4ea
1. Using Cross-head Screwdriver, Loosen Four Spherical Bolts to Open Front Cover.
2.
Determine the Area to be Repaired and Checked.
P/S only
for PC
CD ROM
CPU and FAN
RAM
VGA CARD
PC I/F
BOARD
MOTHER
BOARD
Version Date WA QA CA Note
00 Nov04 O O O
6-3-2.
Replacement of Old P/S with P/S only for PC
6. Computer
(CP-40)
Classification Application Date Model Name Serial No. Remarks
Field
Equipment
Oct. 15, 2001
CP40CV
CP40L
CP45F
396 ~
1082 ~
470 ~
Classification Before After
Equipment Install Power Bracket(J7052683A).
Control
Equipped with CP-20,40,45,50 Power Good
Board(J9060028C:40, J9060057B:45)
After removing Power Good Board, Install
Power Supply(J4401021A) only for PC.
S/W
Material
Specification
Material No. :J9060028C:40, J9060057B:45
Nomenclature :POWER GOOD BOARD (VER 2.0)
PC POWER SUPPLY(J4401021A,ST-230WHF)
PC POWER BRACKET(J7052683A)
Version Date WA QA CA Note
00 04/11 O O O
3.Purpose
Install Power Supply only for PC on CP-20, CP-40, CP-45, CP-50 Equipment Mounted with Power Good Board.
-. When Replacing Mother Board, Stabilize CP-20, CP-40, CP-45, CP-50 Equipment Mounted with Power Good Board by installing
Power Supply only for PC instead of Mother Board.
Applied after October, 2001.
4. Application Scope
5. Material