CP40 service manual.pdf - 第67页
0. Install & Driver (CP-40) Version Date WA QA CA Note 00 Nov04 O O O *N o t e Surface of Chip Mounter 1)X-Y moving surface of Head 2)Feeding surface of Feeder 3)PCB placing surface (Conveyor surface) 4)A NC surface …
0. Install & Driver
(CP-40)
Version Date WA QA CA Note
00 Nov04 O O O
2.0
-. Standard 0.05mm/m
: within 2.5 of leveler scale
=> Set within 2.0 (Leveler error, Measurement error)
-. Leveling is required after the movement of equipment
(To prevent the transformation by leaving without leveling)
- The party who move the equipment has to perform the leveling.
0. Install & Driver
(CP-40)
Version Date WA QA CA Note
00 Nov04 O O O
*Note
Surface of Chip Mounter
1)X-Y moving surface of Head
2)Feeding surface of Feeder
3)PCB placing surface
(Conveyor surface)
4)ANC surface
*Note
: If Nut tightening is poor,
the nut will be loosen due
to vibration of machine so
the machine can't keep its
level.
0. Install & Driver
(CP-40)
Version Date WA QA CA Note
00 Nov04 O O O
=>
=>
PCB #1
PCB #2
PCB #2PCB #1
FOOT
Leveler Direction
Front/Rear
Adjustment
Left/Right Adjustment