CP40 service manual.pdf - 第231页

11. Utility (CP-40) 11-3-6. CP-40 SPEC CP40L/LV+ Specification Classificatio n CP40L+ CP40LV+ Remarks Korea As ia Continent Europe/America Continent(40C+) Korea A sia Continent Europe/America Continent(40CV+) Alignment R…

100%1 / 250
11. Utility
(CP-40)
<Checkout>
1. Check the Inside of Air Filter is Wet.
2. Check Filter Element is not Clogged.
3. Check Filter Element is not Discolored.
4. Check Water is Exhausted Properly from Drainer.
5. Insert Tube into Drainer(If Applied).
6. Check Tube is not worn abnormally.
7. Check Air is not Leaked Due to Tube
Disconnection or Fitting Looseness.
Caution)
If Replacing Air Filter without Shutting off Air
Pressure, Injury to Personnel may be Caused.
<Action>
1. Pull Down Lock Button of Air Filter Container and
Turn it to Side to Disconnect Container.
2. Disconnect Damaged Filter Element.
3. Install New Filter Element in Reverse Orders of
Disassembly.
4. Reassemble the Container.
AirFilter&AutoDrainer
Version Date WA QA CA Note
00 Nov04 O O O
11. Utility
(CP-40)
11-3-6. CP-40 SPEC
CP40L/LV+ Specification
Classification
CP40L+ CP40LV+ Remarks
Korea Asia Continent
Europe/America
Continent(40C+)
Korea Asia Continent
Europe/America
Continent(40CV+)
Alignment Rate Component Aligner Cyber Aligner Component Aligner + Upward Vision
Cyber Aligner +
Upward Vision
Board Size Max:460 x 400 x 4.0 (mm) ~ Min : 50 x 50 x 0.5 (mm), Option 0.38 ~ 4.2 t(mm)
Placement Rate
0.25 sec/chip
0.85 sec/IC (Aligner)
0.22 sec
0.85 sec
0.26 sec
0.85 sec
0.25 sec/chip
0.85 sec/IC (Aligner)
1.6 sec/IC (Upward Vision)
0.22 sec
0.85 sec
1.6 sec
0.26 sec
0.85 sec
1.6 sec
3-Stage Conveyor
Feeder Capacity( 8mm
Tape )
104 ea(st), 96ea(Docking Cart is Applied) 101ea(st), 97ea(Front Docking Cart is Applied)
Conveyor Direction Left --> Right (Option : Right --> Left)
Placement Accuracy
(chip)
±
0.1 mm
(chip)
±
0.1 mm
(QFP)
±
0.06 mm(0.5mm Pitch)
(QFP) Option :
±
0.05 mm(0.4mm Pitch)
(QFP) Option :
±
0.04 mm(0.3 mm Pitch)
Component Range
Min : 1005 ~ (Option : 0603 ~ )
Max: 23 x 23 mm
Min : 1005 ~ (Option : 0603 ~ )
Max:
23 x 23 mm (Aligner)
ST :
42 x 42 mm (35mm FOV Camera)
OP : 55 x 55 mm (45mm FOV Camera)
OP :
17 x 17 mm (20mm FOV Camera)
1005 ~ (Option : 0603 ~ )
23 x 23 mm (Aligner)
55 (45mm FOV Camera)
42 (35mm FOV Camera)
17 (20mm FOV Camera)
Power Requirement 100,110,200,220,240V 50/60Hz 2.6kva(Max)
Net Weight Approx. 1,130 Kg
Feeder Type 8,12,24,32,44,56 mm Tape Feeder, Belt Stick Feeder(stack,multi), Vibratory Stick Feeder(Multi), Tray Feeder(1,20,NS12,shuttle)
Air Consumption 150 Nl/min
Version Date WA QA CA Note
00 Nov04 O O O
11. Utility
(CP-40)
Differences from CP-40L/LV
Version Date WA QA CA Note
00 Nov04 O O O