Utah-94-721002-System-Manual.pdf - 第7页
QCF 61 Issue 7 Oxford Instruments Plasma Technology Sheet 1/2 North End, Yatton Bristol, BS49 4AP England. Telephone : +44 (0) 1934 837000 Fax: +44 (0) 1934 837001 E mail: plasma.technology@oxinst.co.uk `boqfcf`^qb=lc==m…
QCF 60 Issue 4
Returns No :
dllap=obqrok=cloj=
• This form must be completed and a copy sent to Oxford Plasma Technology Service Department by fax or mail
before return of any goods to the factory. (Fax No : + 44 (0) 1934 837071)
• If return to the factory is approved a Returns Authorisation Number will be issued. This should be written in the
box provided on this form and the completed form returned with the goods as part of the shipping documentation.
It must be possible to read this form without opening the packaging containing the goods, therefore the
form should not be enclosed within the packaging but affixed to the container.
• Once the Returns Authorisation Number is issued goods should be returned within one month. OIPT
reserve the right to invoice the full value of parts if not returned.
• All sections below must be completed. If any section does not apply, mark that section "not applicable". If the
information requested is not known, mark that section "not known".
• Any goods returned to the factory without a copy of this form carrying a Returns Authorisation Number
will be considered hazardous and may be disposed of at the sender's expense.
Mark the returns number
on all packages and supporting shipping documentation.
Equipment description.
Serial number or identifying marking
Original OIPT order No :
Date of order :
Reason for return of part/s.
Description of fault/s.
Chemical names of all materials which have come into
contact with the goods.
Precautions which must be taken when handling these
materials.
Nature of hazard(s) presented by contact with these
materials.
Action to be taken in the event of human contact or
spillage of these materials.
Details of any decontamination carried out prior to
shipping
.
Levels of residual substances left in or on the returned
goods.
Name and address of person to be contacted in case of
query.
Tel No : Ext :
Fax No :
Declaration
Please strike through the section a) or b) which does not apply and sign the declaration.
a) I hereby confirm that the equipment detailed above has not come into contact with any hazardous substance
and has been drained of any lubricant.
b) I hereby confirm that the only hazardous materials to which the equipment detailed above has been exposed
are listed above and that the following precautions have been taken.
1. The equipment has been drained of any lubricant
2. All ports have been sealed and the equipment has been securely packed and labelled in accordance with
Oxford Instruments Plasma Technology recommendations (available on request)
3. The carrier has been informed of the nature of the consignment.
Signed. . . . . . . . . . . . . . . . . . . . . . . . . . . . Date. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . Position. . . . . . . . . . . . . . . . . . . . . . . . . .
QCF 61 Issue 7
Oxford Instruments Plasma Technology
Sheet 1/2
North End, Yatton
Bristol, BS49 4AP
England.
Telephone : +44 (0) 1934 837000
Fax: +44 (0) 1934 837001
E mail: plasma.technology@oxinst.co.uk
`boqfcf`^qb=lc==mobJ^``bmq^k`b=
This form is to be completed in accordance with the guidelines stated in QCF 61a.
Witnessed by: Oxford Instruments Plasma Technology representative
Signature: Date: / / 0
Accepted by: Representative of the end user.
Signature: Date: / / 0
Brief description of the system:
The above equipment has been examined / tested in my presence, at Oxford Plasma Technology.
The following list defines items that need to be actioned prior to final acceptance being given.
Customer
Project number:
Equipment serial number/s:
OIPT circulation:
Service Manager
Design Manager
QCF 61 Issue 7
Sheet 2/2
Oxford Instruments Plasma Technology
North End, Yatton
Bristol, BS49 4AP
England.
Telephone : +44 (0) 1934 837000
Fax: +44 (0) 1934 837001
E mail: plasma.technology@oxinst.co.uk
`boqfcf`^qb=lc=^``bmq^k`b=
Please ask our representative for a copy of our Customer feedback form, in order that you may record your
opinions of the service given by Oxford Plasma Technology Ltd.
Brief description of the system:
Pre-acceptance form completed at OIPT ? Yes / No
Customer:
Project number:
Equipment serial number/s:
Witnessed by: Oxford Instuments Plasma Technology representative
Signature: Date: / / 0
Accepted by: Representative of the end user.
Signature: Date: / / 0
The equipment supplied has been examined and tested as an assembled system in my
presence, and has given satisfactory results where shown. (Tick as appropriate)
Operational Process
I am satisfied with the results that this system has produced and I accept that the technical
specifications have been achieved.
Comments:-
OIPT circulation:
Service Manager
Design Manager