CP643E.pdf - 第4页
FK-9F98-05 CP- 643E Training Text for Service Engineers Edition 5.0 About this Manual Fuji Machine Mfg. Co., Ltd. Okazaki SMT Equipmen t Quality Assurance Dept. Technical Support Div. Section No.2 i About This Manual Thi…
Notice
1. All rights regarding this manual are reserved by Fuji Machine Manufacturing Co., Ltd. This
manual may not, in whole or in part, be reproduced by any means (electronic, mechanical or
otherwise), or reused in any way, without the prior written permission of Fuji Machine
Manufacturing Co., Ltd.
2. Fuji Machine Manufacturing Co., Ltd. accepts no responsibility for any situations that may
arise as a result of the use of this manual.
3. Fuji Machine Manufacturing Co., Ltd. reserves the right to change the content of this manual
without notice.
4. Every effort has been made to ensure that this manual is correct in every detail. However,
please contact Fuji in the unlikely event that errors or omissions are detected.
Copyright 2001 by Fuji Machine Manufacturing Co., Ltd. All rights Reserved.
is a trademark of Fuji Machine Manufacturing Co., Ltd., and registered in the
following countries: Austria, Belgium, Denmark, Finland, France, Germany, Greece, Indonesia,
Ireland, Italy, Japan, Korea, Luxembourg, the Netherlands, Portugal, Spain, Sweden, the U.K.,
and the U.S.A.
Fuji Machine Manufacturing Co., Ltd. serves its customers from the following locations:
Fuji Machine Manufacturing Co., Ltd.
19 Chausuyama Yamamachi, Chiryu, Aichi, 472-8686 Japan
Tel: (0566) 81-2111 Fax: (0566) 83-1140
Fuji America Corporation
171 Corporate Woods Parkway, Vernon hills, IL. 60061 USA
Tel: (847) 913-0162 Fax: (847) 913-0186
Fuji Machine Mfg (Europe) GmbH
Peter-Sander-Str. 43, D-55252 Mainz-Kastel Germany
Tel: 06134-202120 Fax: 06134-202200
Fuji do Brasil Maquinas Industriais Ltda.
Rua Joao Cachoeira,
128 Itaim Bibi, Sao Paulo, SP 04535-000 Brasil
Tel: 11-3064-7650 Fax: 11-852-6833
Fuji Machine Philippines, Inc.
Warehouse 888 Don Mariano Lim
Industrial Complex (La Fuerza Compound) Alabang, Zapote Rd.,
Almanza Uno Las Pinas City, Philippines
Tel: (02) 809-4565 Fax: (02) 807-2767
Fuji Singapore Office
C/O Mecomb Singapore Limited
Sime Darby Centre, 896 Dunearn Road #04-03A, Singapore 589472
Tel: 4675952 Fax: 4693758
Fuji Malaysia Office
C/O Mecomb Malaysia Sdn Bhd
2487, Jalan Sultan Azlan Shah, 11700 Penang, Malaysia
Tel: (04) 656-4002 Fax: (04) 656-2941
Fuji Taiwan Office
C/O Ascentex Industry Corp.
3 Fl, No. 396, Sec. 1, Nei Hu Rd., Taipei, Taiwan R.O.C.
Tel: (02) 8797-8716 Fax: (02) 8797-8717
FK-9F98-05 CP-643E Training Text for Service Engineers
Edition 5.0 About this Manual
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
Technical Support Div. Section No.2
i
About This Manual
This manual contains machine adjustment information for service engineers. The manual content is
intended for engineers familiar with the systems integrated within this machine.
Please read this manual carefully in order to ensure safe and efficient machine servicing.
Manual Structure
This manual consists of the following chapters and information:
Chapter 1 Initial Set-up
Chapter 2 Cam box adjustment
Chapter 3 X, Y, Z, and D-axes adjustment
Chapter 4 Station adjustment
Chapter 5 Loader adjustment
Chapter 6 Servo adjustment
Chapter 7 Camera adjustment
Chapter 8 Placing Accuracy Measurement
Chapter 9 Miscellaneous Adjustments
Supplemental Information
FK-9F98-05 CP-643E Training Text for Service Engineers
Edition 5.0 About this Manual
Fuji Machine Mfg. Co., Ltd. Okazaki
SMT Equipment Quality Assurance Dept.
Technical Support Div. Section No.2
ii
Page Layout
Each page indicates the chapter number and title, section number, body, manual name,
page number and edition number.
Chapter number
The chapter number to which each section belongs is shown in the header on each page.
The manual is made up of 12 chapters as detailed earlier in this section.
Section number and title
The title of each chapter is shown in the header on each page. Each part may contain one
or more sections.
Section title
Each chapter may be divided into several sections. The section number is composed of the
number of the chapter to which the section belongs, followed by a sequential number for
each section.
Body
The information needed to understand the workings of the machine and how to perform
adjustments is explained using text and illustrations.
Chapter number and title
Manual name
Manual reference number
FK-9F98-XX
Edition number
Edition 1.0
Page number
1-1
Chapter 1. Initial Setup
Fuji Machine Mfg. Co., Ltd.
Okazaki
SMT Quality Assurance Dept.
Technical Support Div. Section No.2
Manual created by
CP-7 Series Training text for Service Engineers
Section number
Body
1-
4
Recovery and Application Software Installation
1. Put the “Recovery CD” into the CD-ROM drive, which is at the
front of the M/C (center box). When installing the CD, the m/c
power must be on.
2. Press the “Windows” key on the keyboard connected to the
machine.
1) Select [Shut down] from the lower left menu.
2) Turn OFF the UPS when the following message appears:
“It is now safe to turn off your computer.”
3) Turn ON the UPS again.
4) Press [SYSTEM ON] from the machine operation panel.
3. Installation
1) When the previous operations are carried out, the display
will pause after the following message: “strike a key
when ready”. Press the space key on the keyboard three
times.
2) Installation will start. (It will take 3 to 5 minutes to
register.)
3) Once registering is finished, the following message will
show and pause:
“strike a key when ready”.
4) Press the space key and quickly change the recovery CD
to the application CD.
5)
FUJI Install software will start and the following message