cp45ref.pdf - 第101页
System Messages of the MMI and Solutions 2-47 S/W error [Solution] Please contact our C/S. $bf30 Error was detected in the sequenc e table in the T skGan. [Problem] S/W error [Solution] Please contact our C/S. $bf31 Erro…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-46
S/W error
[Solution]
Please contact our C/S.
$bf11 Error was detected in the scheduler table in the TskHead.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf12 Error was detected while the sequence in the TskHead was executed.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf20 Error was detected in the sequence table in the TskMir.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf21 Error was detected in the scheduler table in the TskMir.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf22 Error was detected while the sequence in the TskMir was executed.
[Problem]
System Messages of the MMI and Solutions
2-47
S/W error
[Solution]
Please contact our C/S.
$bf30 Error was detected in the sequence table in the TskGan.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf31 Error was detected in the scheduler table in the TskGan.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf32 Error was detected while the sequence in the TskGan was executed.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf80 Can't find the TskTray data.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bfff Undefined ERROR.
[Problem]
S/W error
[Solution]
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-48
Please contact our C/S.
$c000 Error occurred while the profile of speed acceleration and deceleration at $A was set.
[Problem]
The factory setting speed profile is incorrect
S/W error
[Solution]
Please contact our C/S.
$c001 Error occurred while the profile of uniform speed at $A was set.
[Problem]
The factory setting speed profile is incorrect
S/W error
[Solution]
Please contact our C/S.
$c002 Error occurred while $A was setting the Home command.
[Problem]
The factory setting speed profile is invalid
S/W error
[Solution]
Please contact our C/S.
$c003 Error occurred in $A during homing.
[Problem]
An error occurred due to sensor or other reasons during homing.
[Solution]
Please contact our C/S.
$c004 Error occurred in $A during homing.
[Problem]