cp45ref.pdf - 第90页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-36 [Problem] S/W error [Solution] Please contact our C/S. $bbbb Assert Fault occurred. [Problem] H/W or S/W error [Solution] Please contact our C/S. $bc00 Equipme…
System Messages of the MMI and Solutions
2-35
$b207 Tray ID Error
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b210 Failed to calculate the mounting angle.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b500 FEEDER_COMMON_ERROR.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b510 TAPE_FEEDER_SW_DATA_ERROR.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b520 STOCK_FEEDER_SW_DATA_ERROR.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b530 TRAY_FEEDER_SW_DATA_ERROR.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-36
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bbbb Assert Fault occurred.
[Problem]
H/W or S/W error
[Solution]
Please contact our C/S.
$bc00 Equipment is not ready.
[Problem]
This error occurs when the equipment is driven without pressing the ready switch.
[Solution]
Press the ready switch in the front.
$bc01 PCB Dada has not been downloaded.
[Problem]
The automatic operation is attempted while the PCB Data has not been downloaded.
[Solution]
Download the PCB Data and operate.
$bc02 Error occurred while the component result offset is to be cleared.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc03 Unsupported vacuum sensor is used.
[Problem]
System Messages of the MMI and Solutions
2-37
S/W error
[Solution]
Please contact our C/S.
$bc04 Error occurred during vacuum level measurement.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc05 Nozzle is blocked.
[Problem]
Nozzle is blocked.
Vacuum sensor error
Nozzle data setting error
[Solution]
Clean the nozzle.
Check the vacuum sensor.
Check the nozzle data setting.
$bc06 More than the maximum number of mounting data exist.
[Problem]
The mounting data is over the maximum
[Solution]
Reduce the number of mounting
$bc07 More arrays than the maximum number exist.
[Problem]
There are more arrays than the maximum number.
[Solution]
Reduce the number of arrays.