cp45ref.pdf - 第83页
System Messages of the MMI and Solutions 2-29 [Solution] Please contact our C/S. $650c No nozzle in the $H. $650d Nozzle in the $H. $6510 Z axis couldn't move to the position of the nozz le inspection sensor . [Prob…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-28
$6503 Can't close the ANC.
$6504 Couldn't move to the nozzle put position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6505 Can't find the Z axis PORT
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6506 SET_AXIS_ADDON_ERROR
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6507 Nozzle PUT data is invalid ( S/W ERROR.).
$6508 Nozzle in the $H and the ANC simultaneously.
$6509 Nozzle to be used in the $H is not in the ANC.
$650a ANC nozzle data ERROR.( S/W ERROR.)
$650b Couldn't move to the nozzle pick position.
[Problem]
S/W error
System Messages of the MMI and Solutions
2-29
[Solution]
Please contact our C/S.
$650c No nozzle in the $H.
$650d Nozzle in the $H.
$6510 Z axis couldn't move to the position of the nozzle inspection sensor.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6520 Can't put, no nozzle in the $H.
$6530 Nozzle in the $H. Couldn't put.
$6540 Z axis couldn't move to the put position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6550 Z axis couldn't move to a safe height after putting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6560 Can't get, nozzle in the $H.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-30
$6570 No nozzle in the $H. Couldn't get.
$6580 Z axis couldn't move to the get position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6590 Z axis couldn't move to a safe height after getting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$7000 Component alignment method not supported by this equipment.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$a100 Error occurred during the processing of vision fiducial mark.
[Problem]
A fiducial mark sensing error occurred.
[Solution]
Check the fiducial mark setting.
$a110 Vision fiducial mark data is invalid
[Problem]
Fiducial mark setting is not valid.
[Solution]
Check the fiducial mark setting.