cp45ref.pdf - 第74页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-20 [Problem] The power of tray feeder is off Communication line to the tray feeder is not normal. [Solution] Check the power of tray feeder . Check the communicat…
System Messages of the MMI and Solutions
2-19
Supply components.
$5101 Error about the number of retries in the tape feeder $F occurred.
[Problem]
There is no component
The tape feeder pick up position is incorrect
[Solution]
Supply components.
Set the pick up position again.
$5200 No component in the stick feeder $F.
$5201 Error occurred in the number of retries in the stick feeder $F.
[Problem]
There is no component
The stick feeder pick up position is incorrect
[Solution]
Supply components.
Set the pick up position again.
$5300 No component in $F.
$5301 Error occurred in the number of retries in the tray feeder $F.
[Problem]
There is no component in the tray feeder
The pick up position on the tray feeder is incorrect
[Solution]
Supply components.
Set the pick up position again.
$5500 TRAY_COMM_ERROR.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-20
[Problem]
The power of tray feeder is off
Communication line to the tray feeder is not normal.
[Solution]
Check the power of tray feeder.
Check the communication cable between the tray feeder and the chip mounter.
$5501 Tray feeder is in error.
[Problem]
The tray feeder is in error.
[Solution]
Remove the cause of error from the tray feeder and restart.
$5502 Tray feeder is not ready.
[Problem]
The tray feeder is not ready
[Solution]
Prepare the tray feeder for operation.
$5503 Error in the tray feeder communication command.
[Problem]
An error occurred during the communication between the tray feeder and the chip
mounter.
The tray feeder type in the chip mounter is incorrect.
[Solution]
Check the communication cable.
Check the tray feeder type and other settings in the chip mounter.
$5504 Error in the tray feeder communication data.
[Problem]
An error occurred during the communication between the tray feeder and the chip
System Messages of the MMI and Solutions
2-21
mounter.
The tray feeder type in the chip mounter is incorrect.
[Solution]
Check the communication cable.
Check the tray feeder type and other settings in the chip mounter.
$5505 No palette in the tray feeder.
[Problem]
There is no specified palette in the tray feeder
[Solution]
Supply the specified palette.
$5506 Time out error in the tray feeder.
[Problem]
There is no response from the tray feeder within the specified time.
[Solution]
Check the tray feeder communication cable.
Check the tray feeder related setting in the chip mounter.
$5507 TRAY_NO_DATA_ERROR.
$5508 TRAY_INVALID_PR_ERROR
$5509 TRAY_SENDING_ERROR
$550a TRAY_INVALID_RES_ERROR
$550b TRAY_INVALID_CMD_ERROR
$55ff TRAY_NOT_DEFINED