cp45ref.pdf - 第41页

Pr eventive Maintenance 1-15 Clean any contamination or dust on th e rail, and apply grease if necessary . 1.2.2.2. Y -axis L/M Guide Rail Inspection  Check the rail for discoloration or dust.  Check the lubricants on …

Samsung Component Placer CP-45F(V)/FS Reference Manual

1-14

tight fastening can be maintained. At this time, take precautions so that the O-ring for

packing located inside the blow chamber doesn't get dislocated.

1.2.2. X-Y Frame Section

1.2.2.1. X-axis L/M Guide Rail

Inspection

 Check the rail for discoloration or dust.

 Check the lubricants on the rails. Insufficient lubricants on the rails could cause

unusual noise during operation of the machine.

X-axis L/M Guide Rail & Bloc

Figure 1-7. X-axis L/M Guide Rail & Block

Solution

Caution

It may shorten the average life span of a machine if grease

not specified by our company is applied on the machine. Use

the grease specified by our company.

Preventive Maintenance

1-15

Clean any contamination or dust on the rail, and apply grease if necessary.

1.2.2.2. Y-axis L/M Guide Rail

Inspection

 Check the rail for discoloration or dust.

 Check the lubricants on the rails. Insufficient lubricants on the rails could cause

unusual noise during operation of the machine.

Figure 1-8. Y-axis L/M Guide

Solution

L/M Guide Block

L/M Guide Rail

Coupling

Grease

Samsung Component Placer CP-45F(V)/FS Reference Manual

1-16

 Clean the rail of any contamination or dust, and apply grease if necessary.

 Apply grease through the grease nipple.

1.2.2.3. X-axis Ball Screw

Inspection

 Check the ball screw for discoloration or dust.

 Check the lubricants on the ball screw. Insufficient lubricants on the rails could cause

unusual noise during operation of the machine.

Solution

Clean the ball screw of any contamination or dust, and apply grease if necessary.

1.2.2.4. Y-axis Ball Screw

Inspection

 Check the ball screw for discoloration or dust.

Grease