cp45ref.pdf - 第71页
System Messages of the MMI and Solutions 2-17 $41 10 T OO_MANY_DUMP . $4200 $H is trying to pick up a component fr om the position of %d which is beyond the l i m i t o f % d . [Problem] When the head is to pick up a com…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-16
$4000 Components that can't be operated together exist in a cycle.
[Problem]
The components that can't be operated together exist in a cycle
[Solution]
Divide one cycle into two and operate.
$4001 Error occurred during a manual operation.
[Problem]
An error occurred during a manual operation.
[Solution]
Please contact our C/S.
$4002 Undefined operation mode is used.
[Problem]
An undefined operation mode is used.
[Solution]
Set the operation mode ( Normal/Dry …) again.
Please contact our C/S.
$4004 Method of deciding bad mark position is invalid.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$4005 Undefined door method.
[Problem]
The door type is set incorrectly
[Solution]
Set the door again in the system setup.
System Messages of the MMI and Solutions
2-17
$4110 TOO_MANY_DUMP.
$4200 $H is trying to pick up a component from the position of %d which is beyond the
limit of %d.
[Problem]
When the head is to pick up a component, the height is beyond the S/W limit.
[Solution]
Set the S/W limit again in the system head setting.
$4201 $H is trying to mount a component on the position of %d which is beyond the limit
of %d.
[Problem]
When the head is to mount a component, the height is beyond the S/W limit.
[Solution]
Set the S/W limit again in the system head setting.
$4202 $H is trying to change the nozzle on the position of %d which is beyond the limit
of %d.
$4300 $A axis is sensed in - S/W Limit when the jog box is used.
[Problem]
When the jog box is used for moving, the S/W limit is sensed.
[Solution]
Change the S/W limit value.
$4301 $A axis is sensed in + S/W Limit when the jog box is used.
[Problem]
When the jog box is used for moving, the S/W limit is sensed.
[Solution]
Change the S/W limit value.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-18
$4400 Can't raise the side light of the head.
[Problem]
Can't raise the side light of the head.
[Solution]
Check if the cylinder driving the side light of the head operates.
Check the position of the sensor driving the side light of the head.
$4401 Can't lower the side light of the head.
[Problem]
Can't lower the side light of the head.
[Solution]
Check if the cylinder driving the side light of the head operates.
Check the position of the sensor driving the side light of the head.
$5000 Undefined feeder method.
[Problem]
S/W error.
[Solution]
Please contact our C/S.
$5001 No component in the feeder $F.
[Problem]
There is no component in the corresponding feeder.
[Solution]
Supply components.
$5100 No component in the tape feeder $F.
[Problem]
There is no component in the tape feeder.
[Solution]