cp45ref.pdf - 第62页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-8 $2102 Can't move backward the edge fixer . [Problem] The edge fixer does not move when it is to be moved backward The backward sensor is not sensed when th…
System Messages of the MMI and Solutions
2-7
$2002 Can't lower the BUT.
[Problem]
The BUT (Back Up Table) does not move when it is to be lowered.
The down sensor is not sensed when the BUT (Back Up Table) is to be lowered.
The up sensor is sensed when the BUT (Back Up Table) is to be lowered.
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the BUT down sensor.
Check the position of the BUT down sensor.
Check the operation of the BUT up sensor.
Check the position of the BUT up sensor.
$2101 Can 't move forward the edge fixer.
[Problem]
The edge fixer does not move when it is to be moved forward.
The move forward sensor is not sensed when the edge fixer is to be moved forward.
The move backward sensor is sensed when the edge fixer is to be moved forward.
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the edge fixer forward sensor.
Check the position of the edge fixer forward sensor.
Check the operation of the edge fixer backward sensor.
Check the position of the edge fixer backward sensor.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-8
$2102 Can't move backward the edge fixer.
[Problem]
The edge fixer does not move when it is to be moved backward
The backward sensor is not sensed when the edge fixer is to be moved backward
The forward sensor is sensed when the edge fixer is to be moved backward
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the edge fixer backward sensor.
Check the position of the edge fixer backward sensor.
Check the operation of the edge fixer forward sensor.
Check the position of the edge fixer forward sensor.
$2201 HOLE_FIX_UP_ERROR.
$2202 HOLE_FIX_DOWN_ERROR.
$2210 The sensor of the hole fixer is not sensed.
[Problem]
When a PCB is to be fixed by the hole fix method, the sensor is not sensed.
[Solution]
Check the position of the hole fixer.
Check the wiring related to the hole fixer.
$2211 The right sensor of the hole fixer is not sensed.
[Problem]
When a PCB is to be fixed by the hole fix method, the right sensor is not sensed.
[Solution]
Check the position of the right hole fixer.
Check the wiring related to the right hole fixer.
System Messages of the MMI and Solutions
2-9
$2212 The left sensor of the hole fixer is not sensed.
[Problem]
When a PCB is to be fixed by the hole fix method, the left sensor is not sensed.
[Solution]
Check the position of the left hole fix.
Check the wiring related to the left hole fixer.
$2301 Can't move forward the edge fixer.
[Problem]
The edge fixer does not move when it is to be moved forward
The forward sensor is not sensed when the edge fixer is to be moved forward.
The backward sensor is sensed when the edge fixer is to be moved forward.
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the edge fixer forward sensor.
Check the position of the edge fixer forward sensor.
Check the operation of the edge fixer backward sensor.
Check the position of the edge fixer backward sensor.
$2302 Can't move backward the edge fixer.
[Problem]
The edge fixer does not move when it is to be moved backward
The backward sensor is not sensed when the edge fixer is to be moved backward
The forward sensor is sensed when the edge fixer is to be moved backward
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the edge fixer backward sensor.
Check the position of the edge fixer backward sensor.