cp45ref.pdf - 第91页
System Messages of the MMI and Solutions 2-37 S/W error [Solution] Please contact our C/S. $bc04 Error occurred during vacuum level measur ement. [Problem] S/W error [Solution] Please contact our C/S. $bc05 Nozzle is blo…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-36
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bbbb Assert Fault occurred.
[Problem]
H/W or S/W error
[Solution]
Please contact our C/S.
$bc00 Equipment is not ready.
[Problem]
This error occurs when the equipment is driven without pressing the ready switch.
[Solution]
Press the ready switch in the front.
$bc01 PCB Dada has not been downloaded.
[Problem]
The automatic operation is attempted while the PCB Data has not been downloaded.
[Solution]
Download the PCB Data and operate.
$bc02 Error occurred while the component result offset is to be cleared.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc03 Unsupported vacuum sensor is used.
[Problem]
System Messages of the MMI and Solutions
2-37
S/W error
[Solution]
Please contact our C/S.
$bc04 Error occurred during vacuum level measurement.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc05 Nozzle is blocked.
[Problem]
Nozzle is blocked.
Vacuum sensor error
Nozzle data setting error
[Solution]
Clean the nozzle.
Check the vacuum sensor.
Check the nozzle data setting.
$bc06 More than the maximum number of mounting data exist.
[Problem]
The mounting data is over the maximum
[Solution]
Reduce the number of mounting
$bc07 More arrays than the maximum number exist.
[Problem]
There are more arrays than the maximum number.
[Solution]
Reduce the number of arrays.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-38
$bc08 More than the maximum number of axes are selected.
[Problem]
S/W error
[Solution]
Please contact C/S.
$bc09 Undefined dump stop option is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc0a Undefined ANC option is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc0b Undefined auto limit search sequence exists.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bd00 Can't find the corresponding component data.
[Problem]
S/W error
[Solution]
Please contact our C/S.