cp45ref.pdf - 第85页
System Messages of the MMI and Solutions 2-31 $a120 Failed in vision fiducial m ark garb. [Problem] H/W or S/W error [Solution] Please contact our C/S. $a130 Failed to r ecognize the vision fiducial mark. [Problem] A fid…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-30
$6570 No nozzle in the $H. Couldn't get.
$6580 Z axis couldn't move to the get position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6590 Z axis couldn't move to a safe height after getting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$7000 Component alignment method not supported by this equipment.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$a100 Error occurred during the processing of vision fiducial mark.
[Problem]
A fiducial mark sensing error occurred.
[Solution]
Check the fiducial mark setting.
$a110 Vision fiducial mark data is invalid
[Problem]
Fiducial mark setting is not valid.
[Solution]
Check the fiducial mark setting.
System Messages of the MMI and Solutions
2-31
$a120 Failed in vision fiducial mark garb.
[Problem]
H/W or S/W error
[Solution]
Please contact our C/S.
$a130 Failed to recognize the vision fiducial mark.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a131 Failed to recognize the vision fiducial mark of the first PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a132 Failed to recognize the vision fiducial mark of the second PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a133 Failed to recognize the vision fiducial mark of the third PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-32
$a134 Failed to recognize the vision fiducial mark of the fourth PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a135 Failed to recognize the vision fiducial mark of the first component.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a136 Failed to recognize the vision fiducial mark of the second component.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a137 Failed to recognize the vision fiducial mark of the third component.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a138 Failed to recognize the vision fiducial mark of the fourth component.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a201 Unsupported camera is used.