cp45ref.pdf - 第72页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-18 $4400 Can't raise the side light of the head. [Problem] Can't raise the side light of the head. [Solution] Check if the cylinder driving the si de li…
System Messages of the MMI and Solutions
2-17
$4110 TOO_MANY_DUMP.
$4200 $H is trying to pick up a component from the position of %d which is beyond the
limit of %d.
[Problem]
When the head is to pick up a component, the height is beyond the S/W limit.
[Solution]
Set the S/W limit again in the system head setting.
$4201 $H is trying to mount a component on the position of %d which is beyond the limit
of %d.
[Problem]
When the head is to mount a component, the height is beyond the S/W limit.
[Solution]
Set the S/W limit again in the system head setting.
$4202 $H is trying to change the nozzle on the position of %d which is beyond the limit
of %d.
$4300 $A axis is sensed in - S/W Limit when the jog box is used.
[Problem]
When the jog box is used for moving, the S/W limit is sensed.
[Solution]
Change the S/W limit value.
$4301 $A axis is sensed in + S/W Limit when the jog box is used.
[Problem]
When the jog box is used for moving, the S/W limit is sensed.
[Solution]
Change the S/W limit value.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-18
$4400 Can't raise the side light of the head.
[Problem]
Can't raise the side light of the head.
[Solution]
Check if the cylinder driving the side light of the head operates.
Check the position of the sensor driving the side light of the head.
$4401 Can't lower the side light of the head.
[Problem]
Can't lower the side light of the head.
[Solution]
Check if the cylinder driving the side light of the head operates.
Check the position of the sensor driving the side light of the head.
$5000 Undefined feeder method.
[Problem]
S/W error.
[Solution]
Please contact our C/S.
$5001 No component in the feeder $F.
[Problem]
There is no component in the corresponding feeder.
[Solution]
Supply components.
$5100 No component in the tape feeder $F.
[Problem]
There is no component in the tape feeder.
[Solution]
System Messages of the MMI and Solutions
2-19
Supply components.
$5101 Error about the number of retries in the tape feeder $F occurred.
[Problem]
There is no component
The tape feeder pick up position is incorrect
[Solution]
Supply components.
Set the pick up position again.
$5200 No component in the stick feeder $F.
$5201 Error occurred in the number of retries in the stick feeder $F.
[Problem]
There is no component
The stick feeder pick up position is incorrect
[Solution]
Supply components.
Set the pick up position again.
$5300 No component in $F.
$5301 Error occurred in the number of retries in the tray feeder $F.
[Problem]
There is no component in the tray feeder
The pick up position on the tray feeder is incorrect
[Solution]
Supply components.
Set the pick up position again.
$5500 TRAY_COMM_ERROR.