cp45ref.pdf - 第64页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-10 Check the operation of the edge fixer forward sensor . Check the position of the edge fixer forward sensor . $2400 Error occurred when the conveyor width was a…
System Messages of the MMI and Solutions
2-9
$2212 The left sensor of the hole fixer is not sensed.
[Problem]
When a PCB is to be fixed by the hole fix method, the left sensor is not sensed.
[Solution]
Check the position of the left hole fix.
Check the wiring related to the left hole fixer.
$2301 Can't move forward the edge fixer.
[Problem]
The edge fixer does not move when it is to be moved forward
The forward sensor is not sensed when the edge fixer is to be moved forward.
The backward sensor is sensed when the edge fixer is to be moved forward.
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the edge fixer forward sensor.
Check the position of the edge fixer forward sensor.
Check the operation of the edge fixer backward sensor.
Check the position of the edge fixer backward sensor.
$2302 Can't move backward the edge fixer.
[Problem]
The edge fixer does not move when it is to be moved backward
The backward sensor is not sensed when the edge fixer is to be moved backward
The forward sensor is sensed when the edge fixer is to be moved backward
[Solution]
Check if the air pressure supplied to the equipment is normal.
Check if the conveyor I/O board is normal.
Check the operation of the edge fixer backward sensor.
Check the position of the edge fixer backward sensor.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-10
Check the operation of the edge fixer forward sensor.
Check the position of the edge fixer forward sensor.
$2400 Error occurred when the conveyor width was adjusted
[Problem]
An error occurred when the conveyor width was adjusted.
[Solution]
Replace the board related to the adjustment of conveyor width.
$3000 PCB is in the conveyor area.
[Problem]
A PCB is on the conveyor when the conveyor width is to be adjusted
[Solution]
Remove the PCB from the conveyor.
Check if the XY is sensed by the sensor on the conveyor.
$3001 PCB is in the input sensor area.
[Problem]
A PCB is in the input sensor area when the operation is to start.
[Solution]
If there is one PCB in the conveyor input , press START.
If there is more than one PCB in the conveyor input , remove them.
$3002 PCB is in the waiting sensor area.
[Problem]
A PCB is in the waiting sensor area when the operation is to start.
[Solution]
If there is one PCB in the conveyor input , press START.
If there is more than one PCB in the conveyor input , remove them.
$3003 PCB is in the mounting sensor area.
System Messages of the MMI and Solutions
2-11
[Problem]
1. A PCB is in the mounting sensor area when the operation is to start
[Solution]
If there is one PCB in the conveyor mounting and if it is all right to start operation,
press START.
If there is more than one PCB, remove them.
$3004 PCB is in the output sensor area.
[Problem]
A PCB is in the output sensor area when the operation is to start
[Solution]
If there is one PCB in the conveyor output and if it is all right to start operation,
press START.
If there is more than one PCB in the conveyor output , remove them.
$3010 There are two PCBs in the input buffer.
[Problem]
This error occurs when the input sensor and waiting sensor are sensed simultaneously
[Solution]
If the PCB size is such that it can be sensed simultaneously, check the PCB size in the
Board of PCB Edit.
Check the sensitivity of the sensors.
$3021 PCB is in the input buffer or waiting buffer.
[Problem]
A PCB is in the input terminal sensor area when the operation is to start.
[Solution]
If there are more than one PCB in the conveyor input terminal, remove them.
$3022 PCB is in the mounting buffer.
[Problem]