cp45ref.pdf - 第89页
System Messages of the MMI and Solutions 2-35 $b207 T ray ID Err or [Problem] S/W error [Solution] Please contact our C/S. $b210 Failed to calculate the mounting angle. [Problem] S/W error [Solution] Please contact our C…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-34
$b100 Invalid factors exist in the manual command.
[Problem]
H/W or S/W error
[Solution]
Please contact our C/S.
$b202 Can't check the head data.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b203 Can't check the tray feeder data.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b204 Can't check the mounting data.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b206 Invalid R speed setting in the component $P.
[Problem]
S/W error
[Solution]
Please contact our C/S.
System Messages of the MMI and Solutions
2-35
$b207 Tray ID Error
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b210 Failed to calculate the mounting angle.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b500 FEEDER_COMMON_ERROR.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b510 TAPE_FEEDER_SW_DATA_ERROR.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b520 STOCK_FEEDER_SW_DATA_ERROR.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$b530 TRAY_FEEDER_SW_DATA_ERROR.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-36
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bbbb Assert Fault occurred.
[Problem]
H/W or S/W error
[Solution]
Please contact our C/S.
$bc00 Equipment is not ready.
[Problem]
This error occurs when the equipment is driven without pressing the ready switch.
[Solution]
Press the ready switch in the front.
$bc01 PCB Dada has not been downloaded.
[Problem]
The automatic operation is attempted while the PCB Data has not been downloaded.
[Solution]
Download the PCB Data and operate.
$bc02 Error occurred while the component result offset is to be cleared.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bc03 Unsupported vacuum sensor is used.
[Problem]