cp45ref.pdf - 第55页
System Messages of the MMI and Solutions 2-1 Chapter 2. System Messages of the MMI and Solutions $0001 Emergency switch is pressed $0002 The emergency switch in the front of equipment is pr essed. [Problem] The emergency…
System Messages of the MMI and Solutions
2-1
Chapter 2. System Messages of the MMI
and Solutions
$0001 Emergency switch is pressed
$0002 The emergency switch in the front of equipment is pressed.
[Problem]
The emergency switch in the front of the equipment is pressed.
[Solution]
Press the stop key in the front.
Cancel it by turning the emergency switch in the front clockwise.
Press the reset key in the front.
$0003 Rear emergency switch is pressed.
[Problem]
The emergency switch in the rear of the equipment is pressed.
[Solution]
Press the stop key in the front.
Cancel it by turning the emergency switch in the rear clockwise.
Press the reset key in the front.
$0004 Motor free switch in the teaching box is pressed.
[Problem]
The motor free switch in the teaching box is pressed.
[Solution]
Press the stop key in the front.
Press the reset key in the front.
$0006 I/O power switch is off.
[Problem]
The main start switch is off.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-2
[Solution]
Press the I of the main start switch.
$0007 Can't turn on the I/O power switch.
[Problem]
The ready relay is on, but the power is not turned on within the set time.
[Solution]
Check the wiring of the I/O area of the main start switch.
Check the wiring of the related area of ready relay.
$0010 Front feeder unlock sensor is sensed.
[Problem]
There is a loose feeder in the front feeder station.
The loose sensor is sensed in the front feeder station due to other reasons.
[Solution]
Check if there is any loose feeder in the front station and take corrective measures.
Remove the contamination sensed by the unlock sensor.
$0011 Rear feeder unlock sensor is sensed.
[Problem]
There is a loose feeder in the rear feeder station.
The unlock sensor is sensed due to other reasons.
[Solution]
Check if there are any loose feeders in the rear station and take corrective measures.
Remove the contamination sensed by the unlock sensor.
$0020 Front door is open.
[Problem]
The front door is open.
The front door sensor or the wiring area is wrong.