cp45ref.pdf - 第81页
System Messages of the MMI and Solutions 2-27 $6070 No nozzle in the head. Can't get. [Problem] Checking after executing nozzle get reve als there is no nozzle in the head [Solution] Check the position in the ANC. C…
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-26
[Problem]
No nozzle is in the head.
[Solution]
Check the ANC setting.
$6030 Nozzle in the head. Can't put.
[Problem]
Checking after putting the nozzle reveals there is a nozzle in the head
[Solution]
Check the Z axis height in the ANC.
Check the operation of the nozzle check sensor.
$6040 Z axis couldn't move to the put position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6050 Z axis couldn't move to a safe height after putting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6060 Can't get, nozzle in the head.
[Problem]
Can't get a nozzle because there is a nozzle in the head.
[Solution]
Check the ANC setting
Check the nozzle check sensor.
System Messages of the MMI and Solutions
2-27
$6070 No nozzle in the head. Can't get.
[Problem]
Checking after executing nozzle get reveals there is no nozzle in the head
[Solution]
Check the position in the ANC.
Check the operation of the nozzle check sensor.
$6080 Z axis couldn't move to the get position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6090 Z axis couldn't move to a safe height after getting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$60a0 NOZZLE_EMPTY_ERROR.
$60b0 NOZZLE_EXIST_ERROR.
$60c0 SET_NOZZLE_POINT_ERROR.
$6501 Can't open the mirror.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6502 Can't open the ANC.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-28
$6503 Can't close the ANC.
$6504 Couldn't move to the nozzle put position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6505 Can't find the Z axis PORT
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6506 SET_AXIS_ADDON_ERROR
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6507 Nozzle PUT data is invalid ( S/W ERROR.).
$6508 Nozzle in the $H and the ANC simultaneously.
$6509 Nozzle to be used in the $H is not in the ANC.
$650a ANC nozzle data ERROR.( S/W ERROR.)
$650b Couldn't move to the nozzle pick position.
[Problem]
S/W error