cp45ref.pdf - 第98页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-44 [Problem] S/W error [Solution] Please contact our C/S. $bec0 The angle at which the vision is unable to recognize is used. [Problem] S/W error [Solution] Pleas…
System Messages of the MMI and Solutions
2-43
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be81 Undefined device for fiducial mark recognition is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be90 Error occurred while the mounting position was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bea0 Error occurred while the position of upward camera was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bea1 Can't check the actual camera to use
[Problem]
S/W error
[Solution]
Please contact our C/S.
$beb0 Error occurred while the head to use first among the interlocked heads was
calculated.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-44
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bec0 The angle at which the vision is unable to recognize is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bed0 Error occurred when the component adjustment data was set.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bee0 Can't check the number of the camera to recognize components.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bef0 Camera other than the upward camera is used for upward vision.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bef1 Camera other than the fly camera is used for fly vision.
[Problem]
System Messages of the MMI and Solutions
2-45
S/W error
[Solution]
Please contact our C/S.
$bf00 Error was detected in the sequence table in the TskSch.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf01 Error was detected in the scheduler table in the TskSch.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf02 Error was detected while the sequence in the TskSch is executed.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf03 Time out occurred in the sequence % in the TskSch.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bf10 Error was detected in the sequence table in the TskHead.
[Problem]