cp45ref.pdf - 第84页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-30 $6570 No nozzle in the $H. Couldn't get. $6580 Z axis couldn't move to the get position. [Problem] S/W error [Solution] Please contact our C/S. $6590…
System Messages of the MMI and Solutions
2-29
[Solution]
Please contact our C/S.
$650c No nozzle in the $H.
$650d Nozzle in the $H.
$6510 Z axis couldn't move to the position of the nozzle inspection sensor.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6520 Can't put, no nozzle in the $H.
$6530 Nozzle in the $H. Couldn't put.
$6540 Z axis couldn't move to the put position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6550 Z axis couldn't move to a safe height after putting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6560 Can't get, nozzle in the $H.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-30
$6570 No nozzle in the $H. Couldn't get.
$6580 Z axis couldn't move to the get position.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$6590 Z axis couldn't move to a safe height after getting.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$7000 Component alignment method not supported by this equipment.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$a100 Error occurred during the processing of vision fiducial mark.
[Problem]
A fiducial mark sensing error occurred.
[Solution]
Check the fiducial mark setting.
$a110 Vision fiducial mark data is invalid
[Problem]
Fiducial mark setting is not valid.
[Solution]
Check the fiducial mark setting.
System Messages of the MMI and Solutions
2-31
$a120 Failed in vision fiducial mark garb.
[Problem]
H/W or S/W error
[Solution]
Please contact our C/S.
$a130 Failed to recognize the vision fiducial mark.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a131 Failed to recognize the vision fiducial mark of the first PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a132 Failed to recognize the vision fiducial mark of the second PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.
$a133 Failed to recognize the vision fiducial mark of the third PCB.
[Problem]
A fiducial mark recognition error occurred.
[Solution]
Check the fiducial mark setting.