cp45ref.pdf - 第112页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-58 S/W error [Solution] Please contact our C/S. $e806 Unregister ed feeder unlock sensor is checked. [Problem] S/W error [Solution] Please contact our C/S. $f800 …
System Messages of the MMI and Solutions
2-57
Please contact our C/S.
Replace the board
$e801 Can't check the speed profile of $A axis.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$e802 Can't check the home escape range of $A axis.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$e803 Error in the Electronic gear ratio of $A axis.
[Problem]
Error in Config factory setting
S/W error
[Solution]
Check the Config and factory setting
Please contact our C/S.
$e804 Can't check the scale of $A axis.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$e805 Can't check the safe position of $A axis.
[Problem]
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-58
S/W error
[Solution]
Please contact our C/S.
$e806 Unregistered feeder unlock sensor is checked.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f800 %d error occurred while the QueueID %d was to be created.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f801 %d error occurred while the %d message was to be posted to the QueueID %d .
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f802 %d error occurred during the pending of message at the QueueID %d.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f803 %d error occurred while the message to the QueueID(?) was to be accepted.
[Problem]
S/W error
[Solution]
System Messages of the MMI and Solutions
2-59
Please contact our C/S.
$f804 %d error occurred while the QueueID %d was to be created.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f810 %d error occurred when the flag was created.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f811 %d error occurred when the Flag %d was cleared.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f812 %d error occurred during the pending at the Flag %d.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$f813 Error occurred while the Flag %d was to be deleted.
[Problem]
S/W error
[Solution]
Please contact our C/S.