cp45ref.pdf - 第96页
Samsung Component Placer CP-45F(V)/FS Refer ence Manual 2-42 [Problem] S/W error [Solution] Please contact our C/S. $be61 Error occurred while the logical coordi nates were converted into the position of h e a d . [Probl…
System Messages of the MMI and Solutions
2-41
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be40 Error occurred when the bad mark position was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be41 Error occurred when the bad mark position on the guide was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be50 Undefined bad mark position method is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be51 Undefined device for bad mark measurement is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be60 Error occurred while the logical coordinates were converted into the position of
fiducial camera.
Samsung Component Placer CP-45F(V)/FS Reference Manual
2-42
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be61 Error occurred while the logical coordinates were converted into the position of
head.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be70 Error occurred while the position of PCB fiducial mark was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be71 Error occurred while the position of component fiducial mark was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be72 Undefined component fiducial mark type.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be80 Undefined PCB fiducial mark recognition method.
System Messages of the MMI and Solutions
2-43
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be81 Undefined device for fiducial mark recognition is used.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$be90 Error occurred while the mounting position was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bea0 Error occurred while the position of upward camera was calculated.
[Problem]
S/W error
[Solution]
Please contact our C/S.
$bea1 Can't check the actual camera to use
[Problem]
S/W error
[Solution]
Please contact our C/S.
$beb0 Error occurred while the head to use first among the interlocked heads was
calculated.