UV-9+Cure+Module+7269348_B+Manual.pdf - 第13页
1 Introduction 1.1 Overview Nordson ASYMT EK’s Select Cure ® UV - 9 inline oven is i deal for top and bott om ma terial cur ing in mid - to - high volume produc tion. Using ultr aviolet light a s the prim ary cure me tho…
1 Introduction
1.1 Overview
Nordson ASYMTEK’s Select Cure
®
UV-9 inline oven is ideal for top and bottom material curing in mid-
to-high volume production. Using ultraviolet light as the primary cure method, the oven is optimized for
curing parts up to 420 mm.
This manual is intended as a reference for production operators, process engineers, service technicians,
and persons unfamiliar with Nordson ASYMTEK products.
This section includes the following topics:
• System Description
• System Installation and Testing
• What is UV Curing?
• Training
• Conveyor
• System Illustrations
1.2 System Description
The UV-9 Cure Module is designed for mid- to high-volume inline curing of ultraviolet light-cured
materials such as inks, adhesives, and coatings for numerous industrial applications.
Table 1-1 List of Standard Features
Features
Description
Integrated Safety
Interlock System
Light Beacon
Safety Interlocks
Emergency Stop (E-Stop)
Exhaust Control
Conveyor
SMEMA Compatible
Adjustable Rail Widths 50 mm (2.0 in.) to 420 mm (16.5 in.)
Adjustable Speed 300 to 1500 mm/min (0.98 – 4.92 ft/min)
1.3 Safety First
Operation of your UV-9 Cure Module involves heat, air pressure, electrical power, mechanical devices,
and the use of hazardous materials. It is essential that every person servicing or operating the cure module
fully understands all hazards, risks, and safety precautions. Refer to Section 2 – Safety for additional
information.
WARNING! CAUTION!
Consult the Material Safety Data Sheet (MSDS) for all fluids used with the
dispensing system. The MSDS provides material usage instructions, disposal
instructions, and safety precautions.
Introduction 1-1
1.4 Documentation Provided
The UV-9 Cure Module comes with several manuals for installation and operation of major system
components and software. For some system components, you may receive Original Equipment
Manufacturer (OEM) manuals. Generally, these OEM manuals are only needed for reference and
advanced troubleshooting. Consult only Nordson ASYMTEK manuals unless directed to do otherwise by
the manuals themselves or by Nordson ASYMTEK Technical Support.
Table 1-2 lists the manuals that may be shipped with a typical UV-9 Cure Module and describes their
usage and the intended user.
Table 1-2 Manuals
Manual
Usage
Intended User
Select Cure UV-9 Cure
Module IOM Manual
General Introduction
Basic Safety
Operator-Performed Maintenance and
Adjustments
Operators and
persons unfamiliar
with the equipment.
Installation or Reinstallation
Advanced Adjustment, Maintenance, and
Service
Troubleshooting
Parts Replacement
Service Technicians
Original Equipment
Manufacturer’s Manuals*
Installation and Replacement
Maintenance
Troubleshooting
* The OEM manuals supplied depend on the configuration of your cure module.
1.5 System Installation and Testing
The UV-9 Cure Module is completely installed and tested on-site by Nordson ASYMTEK Technical
Support. The system should not be moved or reinstalled by other than Nordson ASYMTEK personnel.
This ensures that the cure module is in good working order.
1.6 What is UV Curing?
Ultraviolet curing is achieved by a chemical reaction in special inks and coatings when intense UV energy
is focused on them. Curing efficiency depends on such factors as UV power, coating thickness, conveyor
speed, type of substrate, and material chemistry.
1-2 Introduction