UV-9+Cure+Module+7269348_B+Manual.pdf - 第91页
Manual Mode Press the MANU button to open the Ma nual Mode scre en. This is ge nerally used by ma intenance personnel to close the entrance and exit s hutters on dem and ( Figure 5- 31 ). Figure 5- 31 Manual Mode Screen …
Additionally, there is a delay function implemented to cope with product carriers and other product
related processes. Select
My Oven > Shutters and enter the delay time in the "Shutter Out Delay Open"
textbox. This allows the user set an earlier opening time than the time calculated by the software.
Figure 5-29 My Oven Menu – Shutters Option
Name
Description
Enable
Enables the shutters feature.
Disable
Disables the shutters feature.
Manu
Opens a manual screen.
Shutter Out Delay
Open
The time (in seconds) the shutter opens before the estimated PCB
arrival at the exit.
Shutter in PCB
Delay
The time (in seconds) before the sensor attempts to detect a board at
the entrance.
Figure 5-30 Shutters Enabled
NOTE The shutters function on SMEMA signals and inlet and outlet sensors open and close
when SMEMA detects a board. In case of a standalone UV-9, the user needs to
implement a switch or foot pedal to simulate a SMEMA signal.
5-28 Operation
Manual Mode
Press the
MANU button to open the Manual Mode screen. This is generally used by maintenance
personnel to close the entrance and exit shutters on demand (Figure 5-31).
Figure 5-31 Manual Mode Screen
Operation 5-29
5.7.4.11 Backup Data/Factory Settings
It is recommended that you to back up the data once the unit is installed. This allows you to
reload the configuration settings in case of an error.
NOTE This does not make a copy of the program, it makes a copy of the PLC settings that are
necessary for proper operation of the UV-9 Cure Module.
To backup data:
1. Select
My Oven and then select Backup Data (Figure 5-32).
The Data Record screen opens (Figure 5-33).
Figure 5-32 My Oven – Control Menu
Figure 5-33 Enter Data Record Name
5-30 Operation