UV-9+Cure+Module+7269348_B+Manual.pdf - 第27页
2.8 Safety Warning Labels Safety warnin g labels on th e UV - 9 Cure Module point out potentially haz ardous area s and rem ind personnel to ta ke necessary safety p recautions. Tab le 2-2 describes safety warning lab el…
2.6 Lifting and Transport Precautions
2.6.1 Considerations
Before attempting to lift a load, personnel should take into consideration the following factors:
• Does the load display a lift hazard warning label as shown below?
• Is lifting and transporting equipment available that might make the task safer and easier?
• Do you need to use personal protective equipment such as back supports and work gloves?
• Do you need an assistant to help you lift or guide the load?
• Do you know the destination for the load and the route you have to follow?
• Has the load been prepared for lifting (doors closed, facility cables disconnected, loose
items secured, earthquake-bolts removed)?
2.6.2 Precautions
When lifting, transporting, and lowering heavy or large loads, personnel should observe the following
precautions:
• Stand close to the load to be lifted and place your feet at shoulder width.
• Firmly grip the load and bring the load close to your body.
• Lift your head and shoulders first and with your back straight, use the strength of your legs
to slowly and smoothly raise yourself up.
• DO NOT twist your body. Change direction by first moving your feet.
• When transporting the load on a cart or a lifting device, reduce back strain by pushing
rather than pulling the load.
• When lowering the load, bend your knees, lower it slowly and smoothly, and keep your
fingers out from under the load.
2.7 Earthquake Precautions
In the event of an earthquake, your cure module must be secured to prevent movement that could
cause injury to personnel and damage to the dispensing system and facility. Each cure module leveler
(foot) should be anchored to the floor. See 3.14 Anchoring the Oven.
As a safety precaution, all hazardous electrical and pneumatic energy is automatically bled out of the
system if electrical power is lost.
WARNING! All personnel should follow facility earthquake safety guidelines.
2-6 Safety
2.8 Safety Warning Labels
Safety warning labels on the UV-9 Cure Module point out potentially hazardous areas and remind
personnel to take necessary safety precautions. Table 2-2 describes safety warning labels that may be on
the cure module.
WARNING! CAUTION!
Comply with all safety warning labels or serious injury to personnel or damage to
the cure module may occur. Worn or damaged labels should be replaced with new
labels having the same part number.
Table 2-2 Safety Warning Symbols
Warning Type
Label/
Symbol
Hazard
Wear Safety
Gloves
Warns personnel to wear appropriate
protective gloves to guard against thermal
extremes and UV radiation.
Wear Safety
Goggles
Warns personnel to wear appropriate safety
goggles to protect the eyes from ultraviolet
radiation.
Consult
Operator’s
Manual
Warns personnel to read the Operator’s
Manual before operating the machine.
Hand
Entanglement/
Moving Material
Warns personnel of moving parts that can
cause serious injury to hands or fingers. Keep
hands away from moving parts.
Disconnect and lock out power before
servicing.
Radiation
Hazard
This label warns of the presence of ultraviolet
radiation.
Protect eyes and skin from exposure to UV
light.
Electrical
(Shock Hazard)
Warns personnel of a high voltage component
that can cause shock, burn, or death.
Use extreme caution when working in or
around these areas.
Disconnect and lock out power
before servicing.
Protective Earth
Ground
This symbol identifies where protective earth
ground is located on the system.
3 Phase
Alternating
Current
This symbol states the system requires a three
phase alternating current source.
Safety 2-7
Item
Description
1 Electrical Warning Label
2 UV Radiation Warning Label
3 Hand Entanglement Label
4 Consult Operator’s Manual Label
5 Wear Safety Goggles Label
6 Wear Safety Gloves Label
Figure 2-1 Safety Warning Labels (Front/Right Side)
6
5
2
3
4
3
2
1
2-8 Safety