UV-9+Cure+Module+7269348_B+Manual.pdf - 第17页
Table 1-3 Front View Features Item Name Description 1 Curing Chamber Hood Provides access to the conveyor and associated mechanical and electrical connections. The Hood is opened via a keyed lock. 2 ON Button (Green) The…
1.9 System Illustrations
The figures in this section show views and features of the cure module. Callouts locate major components
and switches seen in each illustration. System features are shown in Figure 1-1 and Figure 1-2.
1.9.1 Front View Features
Figure 1-1 and Table 1-3 describe the front exterior features of the UV-9 Cure Module.
Figure 1-1 Front View
8
7
6
2
4
5
1
3
1-4 Introduction
Table 1-3 Front View Features
Item
Name
Description
1
Curing Chamber
Hood
Provides access to the conveyor and associated mechanical and electrical
connections. The Hood is opened via a keyed lock.
2
ON Button
(Green)
The ON button powers on the UV-9 Cure Module. Note: The ON button
DOES NOT turn on the oven.
3
Start/Stop Button
(Black)
The Start/Stop button turns the oven on and off. To start the over, press
the black button for one (1) second. To stop the oven, press the black
button for five (5) seconds.
4 Door Lock
A keyed door lock restricts access to the electrical components located in
the electronics enclosure.
5
Electronics
Enclosure Door
To gain access to UV-9 Cure Module electronics, make sure the Main
Power Switch is in the OFF (I) position, and unlock the door with the key
provided.
6 E-Stop Button
Cuts power to all system components. See 2.10 Emergency Shutdown for
detailed information.
7 Levelers
The feet of the UV-9 Cure Module. They are adjusted during installation
and should not need attention unless the cure module is moved to a new
location. See 3.7 Leveling the UV-9 Cure Module for more information.
8 Light Beacon
Visually indicates UV-9 Cure Module operating status. It has green,
orange, and red status indicator lamps. See 2.13.3 Light Beacon for lamp
color definitions.
Introduction 1-5
1.9.2 Rear View Features
Figure 1-2 and Table 1-4 describe the rear exterior features of the UV-9 Cure Module.
Figure 1-2 Rear View
1
3
2
4
5
6
1-6 Introduction