UV-9+Cure+Module+7269348_B+Manual.pdf - 第85页

5.7.4.6 PLC Output Screens The PLC Outpu t screens display the active/inacti ve status of the o utputs. Select th e Output PLC button on the "My Oven" m enu to open this sc reen .  NOTE The background of the o…

100%1 / 142
5.7.4.5 SMEMA Screen
The SMEMA screen displays the various SMEMA related setpoints. Select the SMEMA button on the
"My Oven" menu to open this screen.
Name Description
Pcb Interval
Time interval between boards (even if the Upstream Available signal
is on).
Note: this feature is active only if ONE PCB is not active (grayed out). If
one PCB is active, the oven will not accept a new board until the
previous board has exited.
Pcb Sensor Delay On (s)
Delay time before attempting to detect a board at the oven entrance.
Pcb Sensor Delay Off (s)
Delay time before attempting to detect a board at the oven exit.
Standby (mn)
Displays the standby setpoint.
The maximum time without board detection before entering Standby
Mode.
Time delay stop UV (mn)
Displays the Time Delay Stop UV setpoint.
The maximum time without board detection before oven stops.
N-1 not ready (s)
Displays the N-1 not ready setpoint.
The maximum time without a signal from the downstream equipment
before the alarm sounds.
Figure 5-22 SMEMA Screen
5-22 Operation
5.7.4.6 PLC Output Screens
The PLC Output screens display the active/inactive status of the outputs. Select the Output PLC button
on the "My Oven" menu to open this screen.
NOTE The background of the outputs is yellow when they are active.
Name
Description
Next
Proceeds to Page 2 of the PLC Output screen.
Back
Returns to Page 1 of the PLC Output screen.
Figure 5-23 PLC Output Screens
Operation 5-23
5.7.4.7 PLC Input Screens
The PLC Input screens display the active/inactive status of the inputs. Select the Input PLC button on the
"My Oven" menu to open this screen.
NOTE The background of the inputs is yellow when they are active.
Figure 5-24 PLC Input Screens
Table 5-1 PLC Input Screen Controls and Indicators
Name
Description
Next
Proceeds to Page 2 of the PLC Input screen.
Back
Returns to Page 1 of the PLC Input screen.
5-24 Operation