drt2_devicenet_q102-e1_20_22_csm2147.pdf - 第29页

9 Smart Slaves DRT2 Series Smart Slaves DRT2 Series ......... ......................... ......................... ................... 10 ■ DR T2-ser ies Smar t Slave F eatures ■ Configurator (V er . 2.20 or Later) Mainte…

MEMO

Smart Slaves DRT2 Series

Smart Slaves DRT2 Series.............................................................................. 10

■ DRT2-series Smart Slave Features

■ Configurator (Ver. 2.20 or Later) Maintenance Window

■ Functions Supported by Smart Slaves

■ Smart Slave Functions

Transistor Remote I/O Terminals..................................................................... 18

DRT2-@D08(-1)/@D16(-1)

Expansion Units............................................................................................... 22

XWT-ID08(-1)/OD08(-1)/ID16(-1)/OD16(-1)

Remote I/O Terminal with Relay Outputs........................................................ 26

DRT2-ROS16

Transistor Remote I/O Terminals with 3-tier Terminal Blocks ......................... 28

DRT2-@D16TA(-1)

e-CON Connector Terminals........................................................................... 31

DRT2-@D16S(-1)

MIL Connector Terminals with Transistors...................................................... 34

DRT2-@D32ML(-1)/@D16ML(-1)

Board Terminals with MIL Connector .............................................................. 39

DRT2-@D32B(-1)/@D32BV(-1)

Screw-less Clamp Terminals with Transistors................................................. 43

DRT2-@D16SL(H)(-1)/@D32SLH(-1)

Environment-resistive Terminals with Transistors (High-function Type).......... 48

DRT2-@D08C(-1)/@D16C(-1)

Environment-resistive Terminals with Transistors (Standard Type)................ 51

DRT2-@D04CL(-1)/@D08CL(-1)/@D16CL(-1)

Analog I/O Terminals....................................................................................... 57

DRT2-AD04(H)/DA02

Temperature Input Terminals .......................................................................... 60

DRT2-TS04@

10 Smart Slaves DRT2 Series

Smart Slaves DRT2 Series

In addition to the standard control functions, the DRT2-series Smart

Slaves can collect a wide variety of manufacturing plant information and

serve as key components in maintenance and quality control systems.

DRT2-series Smart Slave Features

Improve Maintenance

• Operation time monitor function

• Contact operations counter *

• Unit conduction time monitor function

• Total ON time monitor function *

• Network power supply voltage

monitor function

• Communications error log function

• Last maintenance date

• Comparator function

• Selectable output value after error

Reduce Downtime

• Unit comments function

• Connected device comments function

• I/O power supply monitor function

• Sensor power supply short-circuit

detection function

• External load short-circuit detection

function

• Disconnected sensor detection

function

Reduce Setup Time

• Network power supply monitor

function

• Input filter function

• Power-ON inrush current

protection function

• Communications speed

auto-detect function

• Scaling function

• User compensation function

• Cumulative counter

• Moving average processing function

• Number of A/D conversion points

(conversion cycle) setting

• Peak/bottom hold function

• Top/valley hold function

• Percentage change calculation

function

* The number of contact operations monitor function and the cumulative ON time monitor function cannot be used simultaneously for the same contact.

Maintenance systemControl system Maintenance systemControl system

Maintenance information

Ethernet

PLC

Control

information

DRT2-series

Smart Slave

Remote I/O Terminals

DRT2-series

Smart Slave

Analog I/O Terminals

DRT2-series

Remote I/O Terminals

Models with 3-tier

Terminal Blocks

DRT2-series

Remote I/O Terminals

Relay Output Terminals

DRT2-series

Screw-less Clamp Terminals

Smart Slave:

DRT2-series

Board Terminals

with MIL Connectors

DRT2-series

Smart Slave

Environment-resistive Terminals

DRT2-series

Smart Slave

Sensor Terminals

● Network power supply voltage monitor

● Unit/Connected device comments

● Unit power-ON time monitor

■ Common Smart Slave Functions

DeviceNet

Configurator

DRT2-series

Smart Slave

MIL Connector

Terminals

(Transistor Model)

The DRT2-series Smart Slaves do not just handle the ON/OFF

signals of I/O devices; they can accumulate a variety of information

to improve the operating efficiency of the equipment. A maintenance

system can be constructed that is separate from the control system.

The side-by-side control system/maintenance system configuration

allows the existing DeviceNet wiring to be used, reduces the

customer’s equipment setup time, reduces the downtime in the event

of a problem, and provides preventative maintenance capabilities.