创建组件识别数据的方法.pdf - 第126页

126/178 IM-SMT-VSNDI C-0002 -000 Item s to be set Set value Explanation Lead W idth: 2N (mm) Sets the width of the leads of Group 2 in the N direction. Lead Pitch: 2N ( mm) Sets the lead pitch of Group 2 in the N directi…

100%1 / 178
125/178
IM-SMT-VSNDIC-0002-000
<< Items to be set for special shapes >>
Items to be set Set value
Explanation
Alignment Group Special Sets the component category.
Alignment Type Special Sets the component type.
Comp. Threshold
Sets the difference of the detection level
for the lead detection.
Comp. Tolerance
Specifies the tolerance of the lead pitch
as a percentage.
Search Area (mm) Sets the range of the detection.
Body Size X (mm) Sets the size of the outer edge.
Body Size Y (mm) Sets the size of the outer edge.
Body Size Z (mm) Sets the size of the outer edge.
Cntr. Offset X (mm)
Sets the offset amount in the X direction
from the center position.
Cntr. Offset Y (mm)
Sets the offset amount in the Y direction
from the center position.
Cntr. Offset R (mm)
Sets the offset amount of the angle of
rotation.
Ruler Width
Algorithm
Selects the recognition algorithm when
using a special algorithm.
Base Alignment
Selects the basic component type when
using a special algorithm.
Vision Option 1 Sets option parameter 1.
Vision Option 2 Sets option parameter 2.
Vision Option 3 Sets option parameter 3.
Common
Data
Vision Option 4 Sets option parameter 4.
Items to be set
Set
value
Explanation
Lead Group N
Sets the number of the Lead
Group (1 or 2).
Common
Ruler Offset N
Sets the offset amount of the
detection line in the N direction.
Lead Number: 1N
Sets the number of leads of
Group 1 in the N direction.
Reflect LL.: 1N (mm)
Sets the lead length on the
image of Group 1 in the N
direction.
Lead Width: 1N (mm)
Sets the width of the leads of
Group 1 in the N direction.
Lead Pitch: 1N (mm)
Sets the lead pitch of Group 1 in
the N direction.
Find Pos X: 1N (mm)
Sets the reference position X for
the lead of Group 1 in the N
direction.
Group
1
Find Pos Y: 1N (mm)
Sets the reference position Y for
the lead of Group 1 in the N
direction.
Lead Number: 2N
Sets the number of leads of
Group 2 in the N direction.
N
direction
Group
2
Reflect LL.: 2N (mm)
Sets the lead length on the
image of Group 2 in the N
direction.
126/178
IM-SMT-VSNDIC-0002-000
Items to be set
Set
value
Explanation
Lead Width: 2N (mm)
Sets the width of the leads of
Group 2 in the N direction.
Lead Pitch: 2N (mm)
Sets the lead pitch of Group 2 in
the N direction.
Find Pos X: 2N (mm)
Sets the reference position X for
the lead of Group 2 in the N
direction.
Find Pos Y: 2N (mm)
Sets the reference position Y for
the lead of Group 2 in the N
direction.
Lead Group S
Sets the number of the Lead
Group (1 or 2).
Common
Ruler Offset S
Sets the offset amount of the
detection line in the S direction.
Lead Number: 1S
Sets the number of leads of
Group 1 in the S direction.
Reflect LL.: 1S (mm)
Sets the lead length on the
image of Group 1 in the S
direction.
Lead Width: 1S (mm)
Sets the width of the leads of
Group 1 in the S direction.
Lead Pitch: 1S (mm)
Sets the lead pitch of Group 1 in
the S direction.
Find Pos X: 1S (mm)
Sets the reference position X for
the lead of Group 1 in the S
direction.
Group
1
Find Pos Y: 1S(mm)
Sets the reference position Y for
the lead of Group 1 in the S
direction.
Lead Number: 2S
Sets the number of leads of
Group 2 in the S direction.
Reflect LL.: 2S(mm)
Sets the lead length on the
image of Group 2 in the S
direction.
Lead Width: 2Smm)
Sets the width of the leads of
Group 2 in the S direction.
Lead Pitch: 2S (mm)
Sets the lead pitch of Group 2 in
the S direction.
Find Pos X: 2S (mm)
Sets the reference position X for
the lead of Group 2 in the S
direction.
S
direction
Group
2
Find Pos Y: 2S(mm)
Sets the reference position Y for
the lead of Group 2 in the S
direction.
Lead Group E
Sets the number of the Lead
Group (1 or 2).
Common
Ruler Offset E
Sets the offset amount of the
detection line in the E direction.
Lead Number: 1E
Sets the number of leads of
Group 1 in the E direction.
E
direction
Group
1
Reflect LL.: 1E (mm)
Sets the lead length on the
image of Group 1 in the E
direction.
127/178
IM-SMT-VSNDIC-0002-000
Items to be set
Set
value
Explanation
Lead Width: 1E (mm)
Sets the width of the leads of
Group 1 in the E direction.
Lead Pitch: 1E (mm)
Sets the lead pitch of Group 1 in
the E direction.
Find Pos X: 1E (mm)
Sets the reference position X for
the lead of Group 1 in the E
direction.
Find Pos Y: 1E(mm)
Sets the reference position Y for
the lead of Group 1 in the E
direction.
Lead Number: 2E
Sets the number of leads of
Group 2 in the E direction.
Reflect LL.: 2E(mm)
Sets the lead length on the
image of Group 2 in the E
direction.
Lead Width: 2Emm)
Sets the width of the leads of
Group 2 in the E direction.
Lead Pitch: 2E (mm)
Sets the lead pitch of Group 2 in
the E direction.
Find Pos X: 2E (mm)
Sets the reference position X for
the lead of Group 2 in the E
direction.
Group
2
Find Pos Y: 2E(mm)
Sets the reference position Y for
the lead of Group 2 in the E
direction.
Lead Group W
Sets the number of the Lead
Group (1or 2).
Common
Ruler Offset W
Sets the offset amount of the
detection line in the E direction.
Lead Number: 1W
Sets the number of leads of
Group 1 in the W direction.
Reflect LL.: 1W (mm)
Sets the lead length on the
image of Group 1 in the W
direction.
Lead Width: 1W (mm)
Sets the width of the leads of
Group 1 in the W direction.
Lead Pitch: 1W (mm)
Sets the lead pitch of Group 1 in
the W direction.
Find Pos X: 1W (mm)
Sets the reference position X for
the lead of Group 1 in the W
direction.
Group
1
Find Pos Y: 1W(mm)
Sets the reference position Y for
the lead of Group 1 in the W
direction.
Lead Number: 2W
Sets the number of leads of
Group 2 in the W direction.
Reflect LL.: 2W(mm)
Sets the lead length on the
image of Group 2 in the W
direction.
Lead Width: 2Wmm)
Sets the width of the leads of
Group 2 in the W direction.
W
direction
Group
2
Lead Pitch: 2W(mm)
Sets the lead pitch of Group 2 in
the W direction.