创建组件识别数据的方法.pdf - 第72页
72/178 IM-SMT-VSNDI C-0002 -000 The following is the actual example of the s etting and the recognitio n result. << Items to be set for 2-di rection conne ctors>> Items to be set Set value Alignment Group Con…
71/178
IM-SMT-VSNDIC-0002-000
Figure 55
[Recognition check items]
Items Yes / No Notes
Body Size No
Lead pitch Yes The pitch in the direction with one lead is not checked.
Lead width
May exist
Checks only when the lead width is more than 1.0mm.
(Note 1)
Reflect LL No
Find Pos No
Table 48
Note:
“Lead width” check function may not be available for the old software versions.
Lead length
Lead width
Lead pitch
Body Size X
Body Size Y
72/178
IM-SMT-VSNDIC-0002-000
The following is the actual example of the setting and the recognition result.
<< Items to be set for 2-direction connectors>>
Items to be set Set value
Alignment Group Connector
Alignment Type Con-NSEW
Comp. Threshold 50
Comp. Tolerance 30
Search Area (mm) 4.0
Body Size X (mm) 8.0
Body Size Y (mm) 14.0
Body Size Z (mm) 7.0
Cntr. Offset X (mm) 0.0
Cntr. Offset Y (mm) 0.0
Cntr. Offset R (mm) 0.0
Ruler Offset N 0
Ruler Offset S 0
Ruler Offset E 5
Ruler Offset W 5
Ruler Width 3
Lead Number E 25
Lead Pitch E (mm) 0.5
Lead Width E (mm) 0.2
Reflect LL. E (mm) 0.8
Lead Number W 25
Lead Pitch W (mm) 0.5
Lead Width W (mm) 0.2
Reflect LL. W (mm) 0.8
Table 49
Figure 56
73/178
IM-SMT-VSNDIC-0002-000
The following is the actual example of the setting and the recognition result. As the tilt is not
stable just by recognizing the E direction, the fixed leads are also targeted for recognition.
<< Items to be set for 3-direction connectors>>
Items to be set Set value
Alignment Group Connector
Alignment Type Con-NSEW
Comp. Threshold 50
Comp. Tolerance 30
Search Area (mm) 4.0
Body Size X (mm) 5.5
Body Size Y (mm) 10.0
Body Size Z (mm) 1.0
Cntr. Offset X (mm) 0.0
Cntr. Offset Y (mm) 0.0
Cntr. Offset R (mm) 0.0
Ruler Offset N 3
Ruler Offset S 3
Ruler Offset E 3
Ruler Offset W 0
Ruler Width 3
Lead Number N 2
Lead Pitch N (mm) 1.0
Lead Width N (mm) 0.2
Reflect LL. N (mm) 0.5
Lead Number S 2
Lead Pitch S (mm) 1.0
Lead Width S (mm) 0.2
Reflect LL. S (mm) 0.5
Lead Number E 6
Lead Pitch E (mm) 0.5
Lead Width E (mm) 0.2
Reflect LL. E (mm) 0.8
Table 50