OptimaUserManual.pdf - 第133页
OPT IMA PAL SO FTW ARE Opti ma User M anual 127 The Hel p M e n u The seventh menu on the Main Programm e r screen is the Help menu: The He lp menu The information av ailable i n t he Help menu provi des assistance with …
OPTIMA PAL SOFTWARE
Optima User Manual
126
Utilities>Create Devicelist
To create a device list, select Utilities>Create Devicelist. The following screen
appears:
Attention screen
Click <Yes> to continue.
A file titled “dev_pal.txt” is then created in your Optima directory. It lists all the
programmable logic devices supported for the installed version of Optima software.
The “dev_pal.txt” file is tab delimited and can be imported into an Excel spreadsheet.
Once imported, use Excel to filter the file to create a device list that meets your
specific needs.
Excel spreadsheet device list (portion)
OPTIMA PAL SOFTWARE
Optima User Manual
127
The Help Menu
The seventh menu on the Main Programmer screen is the Help menu:
The Help menu
The information available in the Help menu provides assistance with commonly used
features and functions of the Optima PAL software.
SINGLE, GANG, AND SWAP PROGRAMMING
Optima User Manual
128
SINGLE, GANG, AND SWAP PROGRAMMING
Optima programmers allow you to program devices one at a time or several at a time.
This flexibility greatly increases programming efficiency.
In single programming mode, one device at a time is programmed. Single
programming can be done on either Singlestye (Optima, Optima Light, or Plus 48) or
Multisyte (Dual, Quad, or Octal) programmers, using any of the optional TOPs.
In gang programming mode, multiple devices can be programmed simultaneously,
with the same data programmed into all devices. Up to eight devices can be
programmed using a single site TOP, and up to 32 devices can be programmed using
the FLASH TOP or TOP432.For gang programming, you need two or more identical
TOPs installed on your Multisyte programmer.
In swap programming mode, up to eight devices can be programmed in alternate (or
swap) cycles, with the same data programmed into all devices. For swap
programming, you need two or more identical TOPs installed on your Multisyte
programmer.