ALFeeder_E.pdf - 第31页
1. Preparation for loading component tape 2-1 Chapter 2 Handling component tape 1. Preparation for loading component tape 1.1 Cutting component tape Cut the top of component tape as below depending on the types of tape a…
Chapter 2 Handling component tape
Contents
1. Preparation for loading component tape 2-1
1.1 Cutting component tape 2-1
1.1.1 New component tape 2-1
1.1.2 Component tape to be reloaded 2-2
1.1.3 Precautions about cutting position of component tape 2-3
1.1.4 Cutting component tape 2-4
1.2 Folding top of component tape 2-6
1.2.1 Folding top of component tape 2-6
2. Loading/Unloading component tape 2-7
2.1 Loading component tape 2-7
2.1.1 Standard type 2-7
2.1.2 With IT Option 2-10
2.2 Unloading component tape 2-13
1. Preparation for loading component tape
2-1
Chapter 2 Handling component tape
1. Preparation for loading component tape
1.1 Cutting component tape
Cut the top of component tape as below depending on the types of tape and the tape condition of use.
1.1.1 New component tape
►
2 mm feed pitch
Cut the side of 4th feed hole from a feed hole on the same line as pocket with first component.
If the feed hole is not on the same line as pocket with first component, cut the side of 4th feed hole from
feed hole on the line between last empty pocket and first pocket with component.
►
4 mm feed pitch
Cut the center of 4th feed hole from feed hole on the line between last empty pocket and first pocket
with component.
2
1
3
4
1
2
3
4
2 mm feed pitch
4 mm feed pitch
Cutting positions of component tape
New component tape (8 mm width)
Stop position when loading is completed
Stop position when loading is completed
First pickup position
Cutting position: Side of feed hole
Cutting position: Center of feed hole
First pickup position
63201-KLU-30
1. Preparation for loading component tape
2-2
Chapter 2 Handling component tape
1.1.2 Component tape to be reloaded
Care must be taken when reloading the unloaded component tape used for Auto loading feeder. The portion
where the cover tape has been already cut with blade on tape guide is unavailable. If the cover tape is
delaminated even a little, the component tape is unavailable.
1
2
3
4
1
2
3
4
2 mm feed pitch
4 mm feed pitch
Cover tape already cut with blade on tape guide
Cover tape already cut with blade on tape guide
First pickup position
Cutting position: Side of feed hole
Cutting position: Center of feed hole
First pickup position
Cutting positions of component tape
Component tape to be reloaded
63202-KLU-30