ALFeeder_E.pdf - 第45页
Chapt er 3 S e t ting up Contents 1. Preparation before operation 3- 1 1. 1 Using Aut o loading feeder 3-1 1.2 Specify ing available components/guide typ es 3-3 1. 2.1 Creating Aut o Loading Feeder Capability list 3-3 1.…
2. Loading/Unloading component tape
2-14
Chapter 2 Handling component tape
3
Unload the component tape by pressing the operation panel buttons.
1. The component tape is unloaded to the direction of arrows in the figure below by pressing
[BACK] and [FUNC] buttons simultaneously.
2. After unloading the component tape, pull it out manually.
Unloading component tape
Press [BACK] and [FUNC] buttons
simultaneously.
63227-KLU-40
Chapter 3 Setting up
Contents
1. Preparation before operation 3-1
1.1 Using Auto loading feeder 3-1
1.2 Specifying available components/guide types 3-3
1.2.1 Creating Auto Loading Feeder Capability list 3-3
1.2.2 Updating Auto Loading Feeder Capability list on board editor 3-6
1.3 Auto loading feeder Optimizer 3-8
1.4 Checking setup/Setup Assignment 3-10
1.4.1 Checking Auto loading feeder information on feeder viewer 3-10
1.4.2 Checking Auto loading feeder information on Setup Assignment 3-11
1.5 Activating Auto loading feeder per line 3-12
2. Preaparation for operation 3-13
2.1 Preset holder and attaching procedure 3-13
2.1.1 Preset holder 3-13
2.1.2 Feeder exchange carriage and reel holder for feeder bank 3-16
2.2 Setting up component tape 3-18
2.2.1 Setting up component tape without IT Option 3-18
2.2.2 Setting up component tape with IT Option 3-23
2.3 Other functions 3-28
3. Operation panel 3-29
3.1 Buttons on operation panel and LEDs 3-29
3.1.1 LED lighting patterns/Status 3-29
3.1.2 Buttons on operation panel 3-30
3.1.3 Sensors inside of the feeder body 3-30
3.2 Single operation 3-31
3.2.1 Loading component tape 3-31
3.2.2 Unloading component tape 3-32
4. Troubleshooting 3-33
4.1 The cover tape does not open correctly. 3-33
4.2 The cover tape cannot be cut correctly. 3-34
4.2.1 Element caused by tape 3-34
4.2.2 Element caused by feeder 3-35
4.3 Components cannot be supplied correctly from reel. 3-36
