MR8740T_Quick guide_eng_20191016H.pdf - 第43页

37 Attaching Connection Cords Output Applicable module Cable to be connected Reference page W aveform Model MR8790 Waveform Generator Unit Model L9795-01 Connection Cable Model L9795-02 Connection Cable p. 49 Pulse Model…

Attaching Connection Cords

2.2 Attaching Connection Cords

Refer to the manuals of the modules and connection cables if provided.

Measurement Applicable module Cable to be connected

Reference

page

Voltage

Model 8966 Analog Unit

Model 8968 High Resolution Unit

Model 8972 DC/RMS Unit

Model U8975 4ch Analog Unit

Model U8978 4CH Analog Unit

Model U8979 Charge Unit*

Model L9197 Connection Cord

Model L9198 Connection Cord

(For measuring low-voltage)

Model L9217 Connection Cord

Model L9790 Connection Cord

Model 9665 10:1 Probe

Model 9666 100:1 Probe

Model 9322 Differential Probe

Model P9000-01 Differential Probe

Model P9000-02 Differential Probe

Model 9166 Connection Cord*

(For inputting voltage

into Model U8979)

p. 17

p. 38

Frequency

Rotation

speed

Count

Model 8970 Freq Unit

Temperature Model 8967 Temp Unit Thermocouple p. 40

Vibration

Load

Pressure

Acceleration

Torque

Displacement

Model U8969 Strain Unit Strain gauge transducer p. 41

U8979 Charge Unit Acceleration sensor p. 46

Current

Model 8971 Current Unit

Model U8977 3CH Current Unit

(Up to nine current sensors)

Current sensor p. 43

Logic signal

Model 8973 Logic Unit

(Up to 3 modules)

Model 9320-01 Logic Probe

Model MR9321-01 Logic Probe

Model 9327 Logic Probe

p. 48

Voltage

(precision)

Model MR8990 Digital Voltmeter Unit Model L2200 Test Lead p. 48

Model U8991 Digital Voltmeter Unit

Model L9197 Connection Cord

Model L9198 Connection Cord

(for measuring low-voltage)

Model L9217 Connection Cord

Model L9790 Connection Cord

p. 38

High voltage Model U8974 High Voltage Unit

Model L4940 Connection Cable

Set

p. 52

*: Model 9166 Connection Cord can be used for Model U8979 Charge Unit only.

Attaching Connection Cords

Output Applicable module Cable to be connected

Reference

page

Waveform Model MR8790 Waveform Generator Unit

Model L9795-01 Connection

Cable

Model L9795-02 Connection

Cable

p. 49

Pulse Model MR8791 Pulse Generator Unit

Commercially available cable

(Half-pitch 50 pins)

p. 50

DC voltage

DC current

Resistance

(simulated)

Model U8794 VIR Generator Unit

Commercially available cable

(D-sub 25 pins)

p. 51

Preparing for Measurement

Attaching Connection Cords

Connection cables (For measuring voltage, frequency, or rotation

speed, and obtaining accumulations)

Insert connection cords to modules. Choose an appropriate connection cord based on the

maximum input voltage and tips of cables.

The maximum input voltage of the instrument or connection cord, whichever is lower, is applicable.

Refer to “Before connecting cords” (p. 16).

Required items: Connection cords

Connection cord

Maximum input

voltage

Type

Model L9197

Connection Cord

600 V Large alligator clip

Model L9198

Connection Cord

300 V Small alligator clip

Model L9217

Connection Cord

300 V BNC output

Model L9790 Connection Cord

Example: with the alligator clip attached.

600 V Alligator clip

Grabber clip

Contact pin

When the voltage to be measured exceeds the maximum input rating of the module

being used

(excluding Model U8991 Digital Voltmeter Unit)

Model 9665 10:1 Probe*

Model 9666 100:1 Probe*

Model 9322 Differential Probe*

Model P9000-01 Differential Probe*

Model P9000-02 Differential Probe*

Example: Model P9000-02 Differential Probe

Alligator clip

*1: The maximum rated voltage to earth depends on a module to be used.

*2: An optional power cord or AC adapter is required.

*3: An optional AC adapter or a commercially available USB cable is required.