3OM-996-005.pdf - 第154页
: Insert Line When pressed, this inserts a blank line at the insertion point’s location. : Initialize When pressed, the changed parameters are reset to the defaults. : Fill When pressed, this fills all the selected text …
: Close
When pressed, this closes the active "Pattern Program"
file (window).
: Save
When pressed, this saves the edited data, replacing the
existing file with the current one.
When a new file is created, it will be saved with a new file
name.
: Save As
When pressed, this saves the edited data (file) with a new
name.
: Undo
When pressed, this reverses the effect of your previous
action.
: Check
When pressed, this checks if there is any deficiency in
the selected pattern program.
When any deficiency is found, the contents (message) of
the error is displayed in the lower area of the window.
When the message line is selected, the deficient data is
expressed in red.
: Cut
When pressed, this removes the selection (data) and
stores it in the Clipboard (a temporary holding area).
The "Paste" icon can be used to copy the selection into
the data at the insertion point’s location.
: Copy
When pressed, this transfers the selection to the Clip-
board without removing the selection.
The "Paste" icon can be used to copy the selection into
the data at the insertion point’s location.
: Paste
When pressed, this pastes the contents of the Clipboard.
: Add Line
When pressed, this adds a blank line to the last one.
0305-001 2-83
AIM01EDTP
4.1 Basic Operations in Edit Windows
: Insert Line
When pressed, this inserts a blank line at the insertion
point’s location.
: Initialize
When pressed, the changed parameters are reset to the
defaults.
: Fill
When pressed, this fills all the selected text boxes with
the parameter in the first text box.
: Component ID List
When pressed, this opens the "Component ID List" win-
dow, enabling you to use the database (component library).
: Open 2nd. Toolbar
When pressed, this opens the second toolbar.
The second toolbar is provided with the following icons.
: Close 2nd. Toolbar
When pressed, this closes the second toolbar.
: Transfer the selected step data
When pressed, this button moves the selected step data.
The selected line (step data) can be moved to an arbi-
trary position.
: When pressed, this button specifies the selected
feeders as dual ones.
Only the feeders (selected lines) that meet the condition
can be specified as dual feeders.
: When pressed, this button cancels the dual-feeder
specification.
Only the feeders specified as dual ones can be released
from the dual-feeder specification.
: Cut Unit
When pressed, this removes the selection (U data) and
stores it in the Clipboard.
: Copy Unit
When pressed, this transfers the selection (U data) to the
Clipboard without removing the selection.
0305-001 2-84
AIM01EDTP
4.1 Basic Operations in Edit Windows
: Paste Unit
When pressed, this copies the selection (U data) at the
insertion point’s location.
: Delete Unit
When pressed, this deletes the currently displayed U data.
: Add New Unit
When pressed, this adds the current U data to the last
line.
: Insert New Unit
When pressed, this inserts the U data behind the cur-
rently displayed "U##" tab sheet.
: Add O Data
When pressed, this adds the O data to the currently se-
lected U data.
: Delete O Data
When pressed, this deletes the O data from the currently
selected U data.
: When pressed, this searches the data.
The "Search" dialog box opens.
"*" (asterisk) and "?" (question mark) can be used
as wild cards.
abc*: The search function retrieves the data
which starts with "abc".
a?c : The search function retrieves the data
which starts with "a" and contains "c" as
the third character.
: Cascade
The currently opened windows (programs) are cascaded
(overlaid), making each title bar visible.
: Tile Horizontally
When pressed, this re-arranges the currently opened "Pat-
tern Program" windows up and down.
: Tile Vertically
The currently opened windows (programs) are re-arranged
side by side.
0305-001 2-85
AIM01EDTP
4.1 Basic Operations in Edit Windows
Note