3OM-996-005.pdf - 第203页

0510-002 3-16 AIM01EDTP 3.1 T oolbar and Icons *2 Edit Sheet This sheet enables the operator to edit the parameters of the se- lected component ID.

: Close

When pressed, this closes the active file of the component

ID data.

: Save

When pressed, this saves the edited data, replacing the

existing file with the current one.

When a new file is created, it will be saved with a new file

name.

: Save As

When pressed, this saves the edited data with a new name.

: When pressed, this button calculates the theoretical

values of the speed data.

The theoretical values of the speed data "Pick-Up", "Rotary

Turret", "Placement", and "Tape Feed Speed" are calculated

and the data is replaced with the calculated values.

When the data should not be replaced with the calculated

values, turn off the check box in the displayed window.

: Check

When pressed, this checks if there is any deficiency in the

data of the selected component ID.

: Cascade

When pressed, this overlays the selected windows (com-

ponent ID files) so that you can see each title bar.

: Tile Vertically

When pressed, this re-arranges the selected windows side

by side.

: Tile Horizontally

When pressed, this re-arranges the selected windows up

and down.

0510-002 3-15

AIM01EDTP

3.1 Toolbar and Icons

0510-002 3-16 AIM01EDTP

3.1 Toolbar and Icons

*2 Edit Sheet

This sheet enables the operator to edit the parameters of the se-

lected component ID.

3.2 "Shape Data" Tab

3.2.1 "Mold Size" Tab

The corresponding tab sheet appears when "Cylindrical", "Square", "De-

form (Simple)", "IC (Simple)", "IC Complex", "Connector (Simple)", "Con-

nector (Complex)", "Other Leaded (Simple)", or "Other Leaded (Com-

plex)" is selected in the "Component shape" text box.

• Sheet Layout

When the "Mold Size" tab is pressed in the "Shape Data" tab sheet,

the following tab sheet appears.

Fig. 3C13 "Shape Data" Tab Sheet ("Deform (Simple)" Selected)

• Sheet Composition

Each parameter is displayed or can be entered.

Refer to "4.1.3 Basic Usage of Text Boxes" for the detailed in-

formation on how to enter each parameter.

(1) Component shape: Cylindrical, Square

*2 Mold size, *4 Polarity existence

0510-002 3-17

AIM01EDTP

3.2 "Shape Data" Tab

Note