3OM-996-005.pdf - 第83页

(A01_02) P .C.B. size X [mm], Y [mm], and T [mm] Set the dimensions of the P .C.B. to be produced. Unit: mm Fig. 3B1 1 When the P .C.B. has a cutout, the following dimensions must be entered. Note: TCM-X1 10 cannot posit…

100%1 / 385
2.2 Pattern Program Name
To save a pattern program, it is required to give a name to the program.
Up to 32 characters (alphanumerics and marks) can be used.
2.3 Operation Data
(A01) P.C.B. Data
Fig. 3B8 Edit Window (Example)
(A01_01) Comment 1, 2
Comments on the pattern program can be specified in these text boxes.
Up to 32 characters (alphanumerics and marks) can be used.
The performance of the machine is not affected by these comments. In
other words, it has nothing to do with or without these comments.
2.2 Pattern Program Name
Note
0510-002 2-13 AIM01EDTP
Fig. 3B9
Comment 1
Comment 2
(A01_02) P.C.B. size
X [mm], Y [mm], and T [mm]
Set the dimensions of the P.C.B. to be produced.
Unit: mm
Fig. 3B11
When the P.C.B. has a cutout, the following dimensions must
be entered.
Note: TCM-X110 cannot position a P.C.B. that has a cutout
like one in the figure below.
Fig. 3B12
Data Input Range
TCM-X110 TCM-X110M
X: 50 to 330 Y: 50 to 250 T: 0.5 to 5.0
TCM-X210
X: 50 to 460 Y: 50 to 381 T: 0.5 to 5.0
TCM-X300
• P.C.B. Origin Position : [to R460 mm]
X: 50 to 460 Y: 50 to 460 T: 0.5 to 5.0
• P.C.B. Origin Position : [to R510 mm]
X: 50 to 510 Y: 50 to 460 T: 0.5 to 5.0
• P.C.B. Origin Position : [to R560 mm]
X: 50 to 560 Y: 50 to 460 T: 0.5 to 5.0
• P.C.B. Origin Position : [to R610 mm]
X: 50 to 610 Y: 50 to 460 T: 0.5 to 5.0
330.000
250.000
1.600
X [mm]
Y [mm]
T [mm]
Fig. 3B10
2.3 Operation Data
0404-002 2-14 AIM01EDTP
P.C.B.
P.C.B. Flow Direction
Y (Vertical)
X (Horizontal)
T (Thickness)
Y (Vertical)
X (Horizontal)
T (Thickness)
P.C.B.
P.C.B. Flow Direction
(A01_03) P.C.B. origin offset
X [mm] and Y [mm]
Set the offset values to correct the difference between the placement
coordinate reference point (N
0
) and the P.C.B. origin (P
0
).
Unit: mm
"Plus" or "Minus" can be set in both X and Y coordinates in the direc-
tion of the correction.
Fig. 3B14 Example of "+" (Plus) Direction for Correction
P.C.B. Origin(P
0
)
X +
Y +
P.C.B.
Placement Coordinate Reference(N
0
)
P.C.B. Origin(P
0
)
X +
Y +
P.C.B.
Placement Coordinate Reference(N
0
)
TCM-X110
TCM-X210 TCM-X300 TCM-X110M
X [mm]
Y [mm]
+00.000
+00.000
Fig. 3B13
2.3 Operation Data
0404-002 2-15 AIM01EDTP