3OM-996-005.pdf - 第318页
0403-001 5-35-1 AIM01EDTP 3.2 "Device Offset" T ab (5) "Noz Detn L" and "Noz Detn H" T abs The navigations similar to those through the "Noz Detn L" tab sheet can be followed throu…
(4) "Nozzle-L" and "Nozzle-H" Tabs
Follow the same procedure for the "Nozzle-H" tab sheet.
• Sheet Layout
When the "Nozzle-L" tab is pressed in the "Nozzle" tab sheet, the fol-
lowing tab sheet appears. When the "Nozzle-H" tab is pressed, almost
the same tab sheet appears.
Fig. 3E33 "Nozzle-L" Tab Sheet
• Sheet Composition
*1 Head
The head Nos. are displayed.
*2 Nozzle #1 [mm], Nozzle #2 [mm], Nozzle #3 [mm], Nozzle #4
[mm], Nozzle #5 [mm]
Each text box shows an offset value that is used to correct varia-
tions in each nozzle height when the nozzle U/D selector (L/H se-
lection) is set to "L" (Low Level) or "H" (High Level).
(a) A plus or minus value is allocated according to the level
variation of each nozzle compared with the origin of
the linear measure detection sensor.
(b) When a nozzle is located above the origin level of
the linear measure detection sensor, a minus (-)
value must be entered as the offset data.
0403-002 5-35 AIM01EDTP
*1 *2
3.2 "Device Offset" Tab
Note
Note
0403-001 5-35-1 AIM01EDTP
3.2 "Device Offset" Tab
(5) "Noz Detn L" and "Noz Detn H" Tabs
The navigations similar to those through the "Noz Detn L" tab
sheet can be followed through the "Noz Detn H" tab sheet.
• Sheet Layout
When the "Noz Detn L" or the "Noz Detn H" tab in the "Nozzle" tab
sheet is selected, the following tab sheet (Nozzle Detection L) appears.
Fig. 3E33-1
• Sheet Composition
*1 Head
The head Nos. are displayed.
*2 Nozzle #1 [mm], Nozzle #2 [mm], Nozzle #3 [mm], Nozzle #4
[mm], Nozzle #5 [mm]
Shown is the offset data of each nozzle level for "(L)" and "(H)" in
the component backtrack detection.
Note
*1 *2
3.2.6 "Camera Offset" Tab
The "Camera Offset" tab sheet is composed of the "Camera Offset",
"Individual Nozzle Camera #1 Gain/Level", and "Individual Nozzle Cam-
era #2 Gain/Level" tabs.
• Sheet Layout
When the "Camera Offset" tab is pressed in the "Device Offset" tab
sheet, the following tab sheet appears.
Fig. 3E34 "Camera Offset" Tab Sheet
• Sheet Composition
*1 "Camera Offset" Tab
When selected, the "Camera Offset" tab sheet appears.
*2 "Individual Nozzle Camera #1 Gain/Level" Tab
When selected, the "Individual Nozzle Camera #1 Gain/Level" tab
sheet appears.
*3 "Individual Nozzle Camera #2 Gain/Level" Tab
When selected, the "Individual Nozzle Camera #2 Gain/Level" tab
sheet appears.
0305-001 5-36
AIM01EDTP
*1 *2
*3
3.2 "Device Offset" Tab