3OM-996-005.pdf - 第368页
• How to specify the available range of a password (1) Specify the scope of authority to use the described functions ("Op- eration Mode (Modify)" through "Placement Head/Noz Data"). Every time the but…
5.2.2 "Available Area Set (1/2) or (2/2)" Tab Sheet
• Sheet Layout
When the "Available Area Set (1/2)" tab is pressed, the following tab
sheet appears.
Fig. 3E65 "Available Area Set (1/2)" Tab Sheet
• Sheet Composition
*1 "Available Area Set" Buttons
The labels on the buttons indicate that the functions described on
the left side of the buttons are available for the following operators.
SUP : This indicates that only the supervisor is given the authority to
use the function.
When a red bar appears on the right side of the function
name, it indicates that the function is available for "Super-
visor"
OP1 : This indicates that the supervisor and the operator #1 are given
the authority to use the function.
Red and green bars appear on the right side of the func-
tion name.
OP2 : This indicates that the supervisor, the operator #1, and the op-
erator #2 are given the authority to use the function.
That is, the selection means that all operators can use the func-
tion.
Red, green, and yellow bars appear on the right side of the
function name.
5.2 "Password" Tab
*1
0305-001 5-79 AIM01EDTP
• How to specify the available range of a password
(1) Specify the scope of authority to use the described functions ("Op-
eration Mode (Modify)" through "Placement Head/Noz Data").
Every time the button (corresponding to the desired function) is
pressed, the label changes in scrolling such as "SUP" Æ "OP1" Æ
"OP2" Æ "SUP".
(2) When the "Available Area Set (2/2)" tab is pressed, the following tab
sheet appears.
Fig. 3E66 "Available Area Set (2/2)" Tab Sheet
(3) Follow the same procedure as "(1)" to specify the scope of authority
to use the described functions ("Unit Adjustment" through "Machine
Set-up").
5.2 "Password" Tab
0305-001 5-80 AIM01EDTP
5.3 "Date & Time Dt" Tab
The corresponding tab sheet enables the operator to set the system
clock (year, month, day, hours, minutes, and seconds) and time zone of
the machine.
The "Date & Time Dt" tab sheet is provided with the following two tab
sheets. When a tab is pressed, the corresponding tab sheet appears.
Table 3E5
Tabs Description
Date & Time The corresponding tab sheet enables the operator to set the internal
clock (year, month, day, hour, minute, and second) in the machine
system.
Time Zone The corresponding tab sheet enables the operator to set the local
time.
5.3.1 "Date & Time" Tab Sheet
• Sheet Layout
When the "Date & Time Dt" tab is pressed, the following tab sheet ap-
pears.
Fig. 3E67 "Date & Time" Tab Sheet
• Sheet Composition
*1 "Date" Group Box
Each button is used to set the date (year, month, and day).
*2 "Time" Group Box
Each button is used to set the time (hour, minute, and second).
*3 [Set] Button
The selections (year, month, day, hours, minutes, and seconds)
are determined.
5.3 "Data & Time Dt" Tab
*2
*1
*3
0305-001 5-81 AIM01EDTP