3OM-996-005.pdf - 第67页

0305-001 1-2 AIM01EDTP

1. Outline of Data

In this machine, the following data is used.

Please fully understand the purposes of each data for better perfor-

mance of the machine.

Pattern Program (Section 2)

Component Library (Section 3)

Management Data (Section 4)

System Setting (Section 5)

Fig. 3A1 Data Composition

• Pattern Programs

Pattern programs must be created for each P.C.B. to be produced.

The automatic operation of this machine is controlled by these pat-

tern programs.

• Component Library

This library stores data related to picks, recognition, and placement

of each individual component.

Refer to another instruction manual "COMPONENT LIBRARY"

(TCM-X Series) for detailed information on the component

library.

• Management Data

This management data contains "Management Data", "Pattern Pro-

gram Management Data", "Component Handling Error Rate Data",

etc.

• System Setting

This function enables the operator to set up various data such as the

system data, the nozzle data, and the machine setup data, etc., re-

lated to the system.

0305-001 1-1

AIM01EDTP

The component IDs in the compo-

nent library are used in the pattern

program.

1. Outline of Data

Note

0305-001 1-2 AIM01EDTP

Section 2

Pattern Program

0403-002 2-A AIM01EDTP

This section describes the contents, editing, etc., of the

pattern program.