3OM-996-005.pdf - 第260页
*2 *1 4. 2 "Machine Performance Data" T ab The corresponding tab sheet enables the operator to view the perfor- mance data of the production model. • Sheet Layout When the "Machine Performance Data" t…
4.1 "Pattern Program Product History" Tab
The corresponding tab sheet enables the operator to check the pattern
program start and end date & time records (logs).
• Sheet Layout
When the "Pattern Program Product History" tab is pressed in the
"Pattern Program Management Data" window, the following tab sheet
appears inside the window.
Fig. 3D16 "Pattern Program Product History" Tab Sheet
• Sheet Composition
*1 List of Pattern Program Logs
Up to 10 records (logs that show the number of times specified as
current pattern program) are displayed for each individual pattern
programs.
The start and end date & time records (logs) are also displayed for
the selected pattern program.
When there are more than 10 logs, the older ones are deleted one
by one.
0305-001 4-33
AIM01EDTP
*1
4.1 "Pattern Program Product History" Tab
*2
*1
4.2 "Machine Performance Data" Tab
The corresponding tab sheet enables the operator to view the perfor-
mance data of the production model.
• Sheet Layout
When the "Machine Performance Data" tab is pressed in the "Pat-
tern Program Management Data" window, the following tab sheet
appears inside the window.
Fig. 3D17 "Machine Performance Data" Tab Sheet
• Sheet Composition
*1 Items
The following items are displayed.
(1) P.C.B. counter
Shown is the number of produced P.C.B.’s.
Counting is implemented when the X/Y table is zeroed after com-
ponent placement operation (when a P.C.B. is finished).
When a particular pattern program is set several times as cur-
rent one, the sum total is computed.
(2) Product P.C.B.
The number of produced unit P.C.B.’s on multi-unit P.C.B. is
summed up. Counting is implemented when the X/Y table is ze-
roed after component placement operation (when a unit is fin-
ished).
When the unit P.C.B. B.B.R. detection function (option) is used,
defective unit P.C.B.'s are excluded.
4.2 "Machine Performance Data" Tab
0403-002 4-34 AIM01EDTP
Note
(3) Passed P.C.B.
The number of passed P.C.B.’s is counted when the machine is
set in the "PASS" mode.
Counting is implemented when the P.C.B. transfer starts (when
the P.C.B. on the X/Y table is transferred to the output conveyor).
(4) Product P.C.B. (B.B.R.)
Shown is the number of defective P.C.B.'s summed up when
the unit P.C.B. B.B.R. detection function (option) is used.
(5) Total components
Shown is the number of picked components (the number of pick-
up operations).
(6) Total handling errors
Shown is the total number of component handling errors.
(7) Rate of handling errors (%)
Shown is the percentage of handling errors per total number of
picked components.
(8) Shortage of component
Shown is the total number of detected component shortage er-
rors.
(9) Waste components
Shown is the total number of components that were picked up
but not placed.
The indicated number of components represents the compo-
nents that were not placed due to a vertical component error
(sensor), a component recognition error, a component thickness
error, interrupted production, the detection of unit P.C.B. (B.B.R.)
(option), etc.
(10) Component backtrack
Shown is the total number of component backtrack errors.
(11) Component output error (Pickup error)
Shown is the total number of the output-error-caused compo-
nents (pickup errors).
(12) Component output error (Others)
Shown is the total number of output-error-caused components
(errors other than pickup ones).
0510-003 4-35 AIM01EDTP
4.2 "Machine Performance Data" Tab
Note