3OM-996-005.pdf - 第72页
1.2 Composition of Operation Data This data is used to generally manage the pattern program data. This data is composed of the P .C.B. data, the P .C.B. recognition data, the P .C.B. recognition mark data, and the setup …
1.1.1 Outline of Various Data
The pattern program is composed of the following data.
Operation Data:
This data is used to generally manage the pattern program data.
Placement Feeder Location Data:
This data is used to set parameters which determine a compo-
nent ID (type) to be allocated to each feeder slot No. (Fdr. No.).
Placement Data:
The set parameters (designation of coordinates and direction)
are used for placement of components allocated in the place-
ment feeder location data.
1.1.2 Input Procedure of Each Data
Refer to "4. "Pattern Program" Edit Window" for detailed information on
how to enter each parameter.
After entering peach parameter, using the network terminal (option),
send it to the main machine.
Pattern Program Data Sheets
Make use of the pattern program data sheets described in "Sec-
tion 6".
1.1 Composition of Pattern Program
Note
0305-001 2-2 AIM01EDTP
1.2 Composition of Operation Data
This data is used to generally manage the pattern program data.
This data is composed of the P.C.B. data, the P.C.B. recognition data,
the P.C.B. recognition mark data, and the setup data.
Refer to "2.3 Operation Data" in "Section 2" for details.
A01 P.C.B. Data Table 3B1
Reference No. Labels
A01_01 Comment 1, 2
A01_02 P.C.B. size
A01_03 P.C.B. origin offset
A01_04 Placement Angle
A01_05 P.C.B. height offset
A01_06 P.C.B. positioning reference
A01_07 Pre-Placed component thickness
A01_08 Placement mode
A01_09 P.C.B. transfer speed
A01_10 Placement data sorting
A01_11 Feeder standby position
A01_12 Alternate mode
A01_13 Feeder No. offset
A01_14 X/Y table accel des
A01_15 F1, F2, F3, F4 accel des
A01_16 Recovery regulation
A01_17 Unit P.C.B. B.B.R (Option)
A01_18 Overall P.C.B. B.B.R (Option)
A02 P.E.C. Recognition Data Table 3B2
Reference No. Labels
A02_01 P.E.C. recognition function
A02_02 P.E.C. recognition mode global
0510-002 2-3
AIM01EDTP
1.2 Composition of Operation Data
A03 P.E.C. Recognition Mark Data Table 3B3
Reference No. Labels
A03_01 Mark #
A03_02 Mark Type
A03_03 Mark Size D1, D2
A03_04 Window Size
A03_05 Mark Image
A03_06 Mark Level
A03_07 Recog Algo
Refer to "(A03_08) Fiducial Marks" for detailed information on
each parameter.
A04 Setup Data Table 3B4
Reference No. Labels
A04_01 L conveyor
A04_02 R conveyor
A04_03 X/Y table chute
A04_04 Support pin up/down
1.2 Composition of Operation Data
0510-002 2-4 AIM01EDTP
Note