OperationInstruction_Vsision XP.pdf - 第16页
Page 8 Vision XP+ V AC 1 Introduction 1.5 System De scription Operating Instructions V ersion 1.5
Vision XP+ VAC Page 7
1 Introduction
1.5 System Description
Operating Instructions
Version 1.5
1.5.1 Zones
Fig. 1-2 Zones
A) Inlet table with exhaust and filter
B) Preheating: 5 to 8 preheating zones, always heated from top and bottom
C) Peak zone: actual soldering zone, always heated from top and bottom
D) Cooling zone: cools PCBs and PCB components down
E) Outlet table with exhaust and filter
F) Additional refrigerated module (optional)
E
D
C
B
A
B
B
F
Page 8 Vision XP+ VAC
1 Introduction
1.5 System Description
Operating Instructions
Version 1.5
Vision XP+ VAC Page 9
2 Operating Safety
2.1 Use of Danger Symbols
Operating Instructions
Version 1.5
2 Operating Safety
Special safety precautions must be adhered to during operation of this
system. These are described in detail here.
The manufacturer’s documentation on these components also contains
safety instructions pertaining to individual components.
These instructions must be heeded to ensure proper operation.
2.1 Use of Danger Symbols
These operating instructions include precautions which must be adhered to
in order to prevent personal injury and property damage. Safety information
is shown by a hazard symbol in conjunction with a signal word depending on
the hazard severity:
In addition to the general hazard symbols used here, other hazard symbols
can be used to make reference to specific hazardous situations.
Danger!
This symbol / signal word combination denotes an imminent threat to the
life and health of individuals.
Failure to comply with this symbol will entail serious health implications,
even life-threatening injuries.
Warning!
This symbol / signal word combination denotes an imminent threat to the
life and health of individuals.
Failure to comply with this symbol will entail serious health implications,
even life-threatening injuries.
a
Attention!
This symbol / signal word combination denotes a potentially hazardous sit-
uation.
Failure to comply with this symbol may entail minor injuries and material
damage.
Note!
Places in the text with this symbol reference important information about
the product or the respective part of the manual.