OperationInstruction_Vsision XP.pdf - 第36页
Page 28 Vision XP+ V AC 2 Operating Safety 2.1 1 T raining Operating Instructions V ersion 1.5 2.1 1 T raining The saf ety regulati ons specif y that all employees must b e trained. However , due to the fact th at not al…
Vision XP+ VAC Page 27
2 Operating Safety
2.10 Locking the System and Attaching Warning
Signs
Operating Instructions
Version 1.5
3. Remove the locks and warning signs.
Each authorized employee must remove his own lock and store it
securely.
4. Switch the system on. Request authorized personnel to determine
whether or not repairs or maintenance work have been properly
executed while the system is running.
2.10.2 Testing
Maintenance personnel or electricians may test the system’s circuits by
activating them briefly without rescinding the locking procedure, as long as
no-one is still working on the components to be tested.
It is extremely important to identify all other start buttons with “Do not place
into operation” warning signs in order to prevent inadvertent start-up of the
system during testing.
2.10.3 Responsibility and Duties
1. It is the responsibility of maintenance personnel and the electricians to
assure that this procedure is adhered to.
2. It is the responsibility of the direct supervisor of maintenance personnel
and the electricians to instruct employees with regard to this procedure.
3. In cooperation with the safety committee, public health authorities, the
managers of the various company departments and the vice president,
it is the responsibility of the safety inspector to enforce the procedure for
locking the system and attaching warning signs.
2.10.4 Disposal
With the disposal in Germany the Closed Substance Cycle Waste Manage-
ment Act (KrW-AbfG) will apply. With wastes requiring special supervision
the record of waste disposal is to be provided.
With the disposal within EU as well as in the remaining foreign countries the
environmental and disposal regulations of each country are to be observed.
Only the disposal according to regulations protects human and environment.
Page 28 Vision XP+ VAC
2 Operating Safety
2.11 Training
Operating Instructions
Version 1.5
2.11 Training
The safety regulations specify that all employees must be trained. However,
due to the fact that not all employees are exposed to the same degree of
danger, extensive training is not necessary for each individual.
In order to determine how much training any given employee requires, each
employee is assigned to one of three different categories, each with its own
level of training:
1. Authorized Employees
These employees install the locks and warning signs, and perform
maintenance and service work. They must have well founded
knowledge of energy regulation for this reason.
Firstly, they must be able to pinpoint and measure all energy sources.
They must also be capable of locating energy sources which cannot be
recognized as such at first glance, for example electrical energy, kinetic
energy, chemical energy and thermal energy. After authorized
employees have mastered these tasks, they must be taught to enable,
regulate and release energy in a safe manner.
2. Effected Employees
This classification includes employees who operate the machines or
components which are to be deactivated. Employees who work in an
area with equipment which must be locked, or which must be identified
as locked, are included in this classification as well. These employees
must be made aware of the basic nature of energy regulation. They
must understand why the locking and identification procedure is so
important, what the locks and warning signs look like and why they must
not be removed.
3. All Other Persons
This classification encompasses all persons who are neither authorized
nor effected employees. This group consists of office personnel,
engineers, supervisors and general management. Although these
persons have no direct contact with the equipment to be locked or
identified as locked, a certain amount of training is nevertheless
appropriate.
The company department which is responsible for safety matters must
conduct audits at regular intervals, in order to assess the locking and
identification procedure. Within the framework of these audits, the safety
inspector must document the extent to which the various aspects of the
procedure are being adhered to. Depending upon the results of the audit, the
safety department shall either conduct a formal examination of the
procedure, or arrange for retraining.
Vision XP+ VAC Page 29
3 From Transport to Initial Start-Up
3.1 Transport Configuration and Transport
Operating Instructions
Version 1.5
3 From Transport to Initial Start-Up
This chapter explains how the system is transported and set up. The various
system segments, display elements and controls located on the system, as
well as the individual components, are described.
3.1 Transport Configuration and Transport
3.1.1 Safety measures
• Please wear during the work the required personal protective equipment
(protection goggles, gloves, ESD- clothes).
• Please observe the information on the packing.
• Don't stay under floating loads.
• Pay attention that the system is transported and put down shock-free and
beat-free.
3.1.2 Transport
Use a forklift with a fork length of at least 1600 mm in order to transport the
system. The forks may only be inserted at the correspondingly identified po-
sitions.
The following components are not yet installed if the system has been
shipped ex-works:
• Monitor screen
• Keyboard
• Fault indicator lamp
Install these components before initial start-up.
Floor Requirements Makes sure that:
• The system is set up on a solid floor which is not subject to vibration.
• The floor’s allowable load per unit is greater than 1000 kg per square me-
ter.
Note!
Users who are not yet familiar with the layout of the system are urged to
read this chapter.