HS50_advance_level 2.pdf - 第255页
Stud ent Gu ide HS-5 0 Adva nced II 07/2 002 Ed ition 8 Y- Axis 37 .(< TBS 20 0 / 10X = S ervo bo ard x- axis TBS 20 0 / 15Y = S ervo bo ard y- axis (1) LED: Re ady for o peration (2) LED: S ervo enabl e (3) L…
07/2002 Edition Student Guide HS-50 Advanced II
8 Y-Axis
36
$[LVG\QDPLFV
NOTE:
All SITEST functions are explained by the use of gantry 1
(TXLSPHQWDQG7HVW'HYLFHV
– 2 or 4 channel storage oscilloscope.
– SIPLACE axis test box, complete.
–SITEST software.
NOTE
The machine must have reached its operating temperature before you begin to adjust the axes.
Therefore, make sure to switch it on, at least 30 minutes before you begin to work.
6HUYR%RDUGV*DQWU\$[HV+6
T
BS 200 / 10X
T
BS 200 / 15Y
Student Guide HS-50 Advanced II 07/2002 Edition
8 Y-Axis
37
.(<
TBS 200 / 10X = Servo board x-axis
TBS 200 / 15Y = Servo board y-axis
(1) LED: Ready for operation
(2) LED: Servo enable
(3) LED: I
RMS
limit
(4) LED: Error
MP1 = Nominal current "I-S (U)"
MP2 = Nominal current "I-S (W)"
MP3 = Actual current "I-ist (U)"
MP4 = Actual current "I-ist (W)"
MP5 = "U-nominal (U)"
MP6 = "U-nominal (W)"
MP7 = Free
MP8 = Reference potential "0V"
NOTE
For a proper triggering connect the endsignal and the nominal current.
07/2002 Edition Student Guide HS-50 Advanced II
8 Y-Axis
38
2YHUYLHZRI$[HV&RQWURO&DUGV+6
type of axis and gantry number
adress of axis
CE = Counting error
0 = Zero pulse
ED = End signal
BE = General error, module error
IN = Initialized
ON = Servo ON
(A) "Axis enable" switch
(1) Servo ON