HS50_advance_level 2.pdf - 第267页
Stud ent Gu ide HS-5 0 Adva nced II 07/2 002 Ed ition 9 Z-Axis 7 (1) 2 x M 2.5 x 8 h exagon s ocket-h ead scr ew (2) S top (3) T oothed b elt for th e Z-ax is (4) T ensio n jac k (5) Z-axis dri ve (6) 2 x d eflection w…
07/2002 Edition Student Guide HS-50 Advanced II
9 Z-Axis
6
5HSODFLQJVSDUHSDUWV
5HSODFLQJWKHWRRWKHGEHOWRIWKH=D[LV
7RROVDQGHTXLSPHQW
– Set of DIN 911 Allen keys
– TSM belt tension measuring device, item no. 00326015-01
– "Measuring belt tensions" instructions
3DUWV
Toothed belt T2 / DLM1, item no. 00334936-01
'LVPDQWOLQJWKHWRRWKHGEHOW7'/0
➠ Switch the placement system off and secure it to prevent switching on again.
➠ Undo the two M2.5x8 hexagon socket-head screws (see item 1 in Fig. 9.2 - 1).
➠ Remove the stop (see item 2) and the tension jack (see item 4 in Fig. 9.2 - 1).
➠ Undo the two M2.5x12 hexagon socket-head screws (see item 3 in Fig. 9.2 - 2) on the motor
clamp fitting 2 (see item 4 in Fig. 9.2 - 2
).
➠ Undo the two M3x14 hexagon socket-head screws (see item 6 in Fig. 9.2 - 2) on the motor
clamp fitting (see item 5 in Fig. 9.2 - 2
).
➠ Loosen the four hexagon socket-head screws M3x5 (see item 1 in Fig. 9.2 - 2).
➠ Remove the toothed belt.
Student Guide HS-50 Advanced II 07/2002 Edition
9 Z-Axis
7
(1) 2 x M2.5x8 hexagon socket-head screw
(2) Stop
(3) Toothed belt for the Z-axis
(4) Tension jack
(5) Z-axis drive
(6) 2 x deflection wheel / DLM1
07/2002 Edition Student Guide HS-50 Advanced II
9 Z-Axis
8
(1) 4 x M3x5 hexagon socket-head screw with locking varnish
(2) Z-axis drive
(3) 2 x M2.5x12 hexagon socket-head screw
(4) Motor clamp fitting 2 / DLM1
(5) Motor clamp fitting / DLM1
(6) 2 x M3x14 hexagon socket-head screw